Search results for query: *

I had the ac and heat deleted engine side and need the heater hoses and water valve, as well as the plate that covers the heater core on the firewall.

Here ya go dude, this is what I have so far. Hope this helps you. Which do yall like best?

I am going to make a knife out of a leaf spring. I need a small 6-12 inch chunk of original leaf spring from a 1972 Valiant. Also if anyone has any original leaf spring chunks from a 340 or hemi car let me know... I am looking to make some original mopar metal knives. Also if anyone has some...

My 904 took a dump... I am in tennessee, looking to see if anyone nearby has a small block 904 i can put in and drive.

I need to find a Finnish plate for the firewall where my heater hoses come out. And I need to find whatever the PIN or dowel that connects the master cylinder or brake booster linkage. I am not sure what that part is called but I currently have a bolt there and I know I need a PIN of some sort...

I came across a msd chip type revlimiter and am wondering rpm should i set it at. I know i will probably never use it, but i am going to install it none the less. My engine is a 72 318 long block with new oil pump, double roller timing chain, tensioner, dougs/ pypes duals, eddy performer and...

This is in relation to my installation of the standard crackedback relay kit. I am having a problem where my driver side headlamp stays on as long as EITHER relay is plugged in, regardless of the switch position (or even if the light switch is unplugged), key in or off. I checked all 3 grounds...

Athens Georgia Craigslist. Looks like it may be an awesome project car. "1971 Dodge Dart Swinger 318 engine, automatic. This car is solid, and would make a great car to restore. Engine does run, but air conditioner does not. $2850.00 or best offer..." Feel free to check link below, and...

1972 Plymouth Valiant with a stock head, cam, bottom end 318 that has just had a top end, timing, charging, oiling and gasket overhaul. After swapping to a 4 barrel, HEI ignition, I was having issues getting it to run. I realized that the intake needed to be retorque sequenced. I chose to...

I need the under column wiring cover for a gold interior. My car is a 72 valiant, auto on column.

Which hose goes where??? I have the new Borgeson power steering kit all installed, (pump, bracket, box, coupler, etc) and was confused which pump line, goes where on the box. I think the lower pressure return is the top port, visible above... but I am not sure. And yes, that is the 160...

Looking for beige colored front armrests in great quality that will fit a 72 valiant.

I am going to order a borgeson box and coupler in a couple hours and I wanted to see if anyone here had a Summit discount that they don't mind sharing with me. Thanks. Jeremy

I am wiring up my two wire HEI distributor and MSD Blaster coil. I cut the blue ECU out, and removed the Ballast Resistor. I was looking for some guidance on how you all wired everything up and capped everything off. The engine is having issues starting, and want to make sure I am running...

I am putting my engine back together, and can not find a page in my fsm showing me how the brackets mount for a federal pump. And there arent any good photos i have found, online. If someone with an ac, federal pump sbm has a diagram or can take a bunch of pics, would you mind sharing?

I have a 73 Spool mount crossmember I have lost the hardware too, for my 72 install... They are needed pretty badly. If they are a common size available in some store let me know, but I can't find one that fits right, they are either too skinny or too long, or the threads don't go far enough...

Stock long block 318, eddie performer, 1406, hei, dougs, and pypes 2.5. I grabbed a dual snorkel ram cold air from spectre, which i am plumbing with tubes into the core support... but will have to run a 2" tall filter for it to fit without having drop base filter plate. I have read about...

I am about to install my radiator and 73 style overflow, and I am going to HAVE to move the charcoal can to make the overflow work... This is a performance daily driver build, and I know the board guru hardasses are all about retaining the can.

The used performer 318 intake i nabbed has a stripped thermostat housing bolt. I need to helicoil it. Does anyone know the size helicoil i need, off hand?

I went in to my car lot today to get some tools for the a body project, and I noticed one of my cars was missing. We leave keys in them during business hours and noticed this trailblazer key was missing a week ago. Not unusual. Then one morning i noticed it was unlocked. This car is parked in...

I was searching around and saw the listing for... 20036 CHEE100 Reman Alternator | Product Details | Remy Auto Parts A 114 amp alternator, for a decent price, and was wondering if anyone has ran these, and if they work for standard sbm alt mounts? I am really just looking for the simplest...

I get the tranny in. Re worked k-member in. Struggled and finally got the engine in place and everything bolted up. After a day or two break I come back and get my headers in place... i go to attach the fllexplate to the tranny, and I cannot turn over the motor... I check everything I possibly...

I am looking for a decent set of ceramic headers for my 73 suspension, la318. I can't have anything over 550 shipped to 37343. I would prefer Doug's

I have been needing headers to finish my build for over a month. My manifolds are shot as is the current exhaust. So i decided while the motor is out to add headers on bolt on dual exhaust. I have been watching eBay online sales and the forums and have missed out a few times on a good deal. I...

New Pyle PLMRA630BT 2000 Watt 6 Channel Bluetooth Marine Bridgeable Amplifier | eBay I was looking into hidden stereos to avoid destroying my dash... the biggest thing i want is bluetooth... everything else is already archaic. I found a few solutions for stealth stereos but realized... they...

I am debating on which cold air system to run. Which is better...? An enclosed 14" air cleaner with dual 4" tubing ran to the front... Or A plenum with dual 4" tubing ran to the front and dome cone air filters at the ends? I like the idea of the plenum because it will give...

New in box, Spicer life series 789x u joints never installed, a little greasy from handling during attempted install. Perfect condition. 20 for the pair, plus shipping from 37343.

I ordered the u joints from rock auto a while back... when i went to install the new u joints i found the spicer solids a hair too long to go in... what ujoints does my baby driveshaft need?

I have some nice scratches in the metal on my 1.03 bars now... i am going to be sick, i dont think sandpaper can fix.

What are these seats, listed on craigslist? Are they mopar?