Search results for query: *

Hi everyone, dont know were to start, my 340 has started with a pretty loud ticking noise, dont know were to start or what to do. Looking for some advice pls and thank you

I hope you have better luck than i did

What did you find the easiest to get it together?

I was wondering the same , do i even need to worry about those pins , once everyting is installed and the column is bolted back under the dash , were can it go

Hello everyone, lookin for some help, i started replacing my steering coupler and the internals because i ve had slop in my steering for years, installed the coupler and parts on the steering column and tried to reinstall, lined up the main splines on the coupler and power steering box, still a...

Thanx for the input guys gonna put the car up on stands this week

Good idea! I will put it up on stands and run it

4speed

Maybe someone can give me some ideas,last year i replaced my driveshaft, had one made for the car from a reputable place , then i bought a new third member for my 8 3/4 , 3:91 posi, again from a reputable source , went through his breakin procedure to a tee. Installed the stuff last year but...

Sorry meant to say a body

Just wondering if anyone has installed a retrosound radio on a 1970 , just looking for some reports on install and finish pros and cons if any.

My 70 , 30 over , slowly adding to it, edelbrock perf rpmwant to do cam swap and headers eventually, shitty pic

On my 70swinger it is left side bottom of dash, if i get a chance tonight ill take a pic

Thanks to everybody! Im learning slowly, put the motor together myself about 20years ago following a book called " how to rebuild your smallblock chrysler" its still running well, just want more. I had the machine work done, crank polished and heads put together, bought the oversize bearings and...

Would they be okay with stock bottom end and heads

Thanks to everyone for the input, roccodart would any of those cams you mentioned require any machinework?

Would like something lopey, no power brakes, as far as hydraulic or roller, i have no idea?

Im looking for help choosing a cam, my goal "high 12s", what i have, 70 dart ,391gears,14"wheels,245 bf goodrich,4spd,340 30over,performer rpm intake,electronic ignition conversion kit, 650 edelbrock carb,internals and heads stock, plan on headers and some port and polishing, i have 10.5 to 1...

My baby

actually I did ask him to find me something like poly locs, and I did find them on mancinis web site for 200.oo , add my exchange and duty I guess I'm around or over 300.oo. eh! lol but it seems like you guys have some other suggestions so thanks very much for the info!

Can anybody reccomend some good small block motor mounts that wont hurt the wallet too bad, im in canada and i guess its pretty hard or expensive to get some good ones up here, went to the local speed shop and hes had quite a hard time finding some that are better than original, he found one set...

I hope it just the brakes ! Thanks guys

Im just in the middle of breaking i a new third member, so i got the back end on jack stands letting it run at idle in first gear, if i get close to my rear wheels i hear noise which sounds like a swishing sound from both bearings,i didnt replace them when i had the axles out because everything...

Thanks big b, do you mean i have to change some parts or just raise the torsion bars

Lol

Thanks for the input guys

Yeah i put the friction modifier first then the royal purple gear oil until it came out the fill plug, is it possible i put too much grease on the axle bearings, also i did an oil change weeks back when i first put the car up on stands and used the valvoline vr1 with zinc, could it be the smrll...

Does anyone know how much the super stock comp leaf springs will cange my ride height?aswell can i just ajust my torsion bars to bring the front up if i have to?

Just wondering if it is normal when breaking in a new third member to have a weird smell, just running the car up on jack stands at idle for the first time with the new carrier and i smell something almost like burning wood

Hey mrpatel, are they farely new how mùch would you like for them