Search results for query: *

Thank you. The car wasn't running when I bought it. I went through it, rebuilt the engine and transmission, and decided to upgrade to the 2 barrel manifold/carb. I'm getting the impression that the general consensus is that the linkage is the problem, which is what I think too. I thought...

I have a 66 Dodge Dart with the original slant six, 904 transmission. I converted it to a "Super 6" 2 barrel, with the appropriate linkage. I have adjusted the linkage several times, but am still having problems. The transmission slips when cold between 1st and 2nd. Once it warms up, it...

Thank you all for the help. I moved the pulley further back onto the shaft to get it aligned with the crank pulley correctly, tightened the belt and it solved the problem. I guess the solution was so simple I just overlooked it.

Thank you for the replies. I will check pulley depth after work. That’s one of those simple potential solutions that never crossed my mind. I bought the pump from Rock Auto parts through Lares Corp, who specializes in steering components.

Thank you. I have a Thompson pump (same as TRW I think) on it now, but from what you said that may or may not mean I have the right combination of pump/pulley to match up. And do you think that misalignment would cause the screeching noise I’m hearing at either stop?

I have a 66 Dodge Dart convertible, with the original, but freshly rebuilt 225 slant six. I put a new p/s pump on it, which bolts right in but makes an awful screeching noise, especially when the wheel is at either lock. I don't have the original pump anymore, and didn't think to compare the...

Thank you

Some pics against a tape measure would help a lot actually. And I will see what I can do about the bracket you need. I should be able to make that for you.

I appreciate the reply. I know it's important and I'm having a difficult time finding one, which is why I thought I'd make one if I can get exact dimensions.

I recently purchased a super six manifold and most of the brackets. The only piece I'm missing the slotted "J" shaped bracket that goes from the carb to the kickdown. It looks like an easy part to make but I want to be sure I get the dimensions right. Specifically I'm worried about how long the...