Search results for query: *

Well, This is a deeper subject than I even thought. So Here is the real problem... I have a 67 B-cuda with a 69 340 LA solid cam Racer brown stiff springs 202 valves mild porting. Also have hi-perf 68 340 exhaust manifolds cast iron with TTI head pipes and exhaust 2 1/2. I am using An 340 victor...

Looks like a Edellbrock performer RPM. But it's not. It must be Chinese knock off. I was planning on. Using this on a small block mopar 340 LA. It appears to have both holes for LA and Magnum engines. Has anyone ever used one of these? Is this a good Intake? I toughtI was purchasing an real...

I have just completed a basic rebuild of a 727 transmission. New clutches seals and gaskets. Every thing looks good and no leaks. : ) Problem is the 3rd gear shift never happens.. The trans shift 1,2 and reverse no problem. 3rd looks like it wants to go at 40 or so then slips into neutral. Slow...

Hello: I am attempting to place a correct hood scoop for a 72 Demon on a stock hood. I now have the drill holes figured out. I still need to know where and how the stock holes are to be cut out on the stock hood or not. Do holes exist on a 72 single six pack hood? where do the holes belong? Can...

I am running a 416 with 12:1 with xheads on pump gas. No problem. Xheads are open chamber which are about 13cc this lowers the compression to 10.73 good to go with 93 oct works fine race gas on race day. : )

Does any one make a prebent (Stock looking)fuel line 3/8 for a Duster from trunk to front pump. Just for an upgrade. Old one was thrashed years ago and I am doing a restore now. Six pack 340 Demon. The right stuff doesn't list it. Please advise. Thanks caxey1

Just a quick post to all I am rebuilding a 74 K-frame and chassis for my 72 demon. I will post pictures at a later date. I am thinking of building complete and placing the engine and trans on, then doing the install from the bottom up. Ive done this before so many years ago; I hope I remember...

I found a machine shop to do it for low bucks. They welded in a steal plug and then pressed it out. Big time saver. nice work. Apex Bensenville, IL. Several others refused the work before I found this one. They also did Two sets of 340 x heads and a 416 stroker motor for me. Such nice work.

I still need this tail panel.

Very nice booster.. What type and where did you get it? Please advise, Thanks.

Hello: I am looking for a super nice dart GTS tail panel. repo OK. Trunk has bolt holes in center of back lid only like a 69. Unsure if a 69 tail will fit. Should say DODGE. Sliver with Black over lay. Please advise. Thank caxey1

All is well! I managed to straighten out the frame rails on my Demon. I used two custom made steel I-Beems and a come-along with a big hammer. K-frame bolts in now and rails now look straight. This was not the first time I had to modify a-body frames. I now wonder how much horse power these cars...

yes

Chicago. MR Norm's area.

This is the best post yet. Cool diagram. I have two custom steel I-beems that bolt to the bumper brackets. These are very strong! have several locations to hook on to and bolt to. So all I think I need is a really good come-along. All I need is that 1/16. other wise I'll bolt up front two put it...

Way to far. But thanks.

After careful consideration I agree. I will try to squeeze the frame rails the 1/16 I need. I have a few more tricks up my sleeves.

I think I need to squeeze them 1/16 or so. should do it. So close and yet so far.

I need to squeeze the rails if that is the case. I was able to straighten the front frame rails where the K-frame bolts up using a steel I-beem (custom made)and the original bolt. so front frame rails now look good and k-frame bolts in front holes no problem. Just the back two holes are about...

Hello: I am replacing the damaged k-frame on my 72 Demon. I replaced the original more than 10 years ago and all was well. I like the horn type mounts. So I manged to bend the k-frame on a high curb at speed, and I bent it badly. (more that that one later) Any way the replacement I have is a...

I need the right side quarter window trim 1968 dart convertible boot trim. This dart has the transition pieces with top door edge stainless. I learn a little more with every car. Can you help? I can send photos of the other side (not needed) or the right side missing needed. Please advise...

I looked at this car again today. some of the trim is still with the car. Missing boot trim is right and left quarter glass "S" pieces and one right quarter stainless. Also need a tail panel for 68 dart GTS. Thanks any help is great!

Hello: does anyone have the complete boot trim with snaps for 67, 68, 69 conv dart GTS? I need every thing from and including the L pieces back. I think some of the pieces are still with the car just unsure of what is what.(so odd pieces might even help) I have not seen this car before the car...

Hello: I am in need of a 67, 68, 69 dart boot trim with snaps. diagrams manuals pictures also needed. I am working on a 1968 dart conv somebody lost all or most of trim long before I ever saw this car. Soooo I need some help if anyone can offer something, please post or message me even better...

Hello: I am in need of 1967 -1969 dart conv boot trim complete with snaps. Please advise if you can help. Caxey1

Hello: I need the complete boot trim with snaps for 1968 dart gt. Please advise if you can help. Thanks caxey1

I am in need of a K-Frame for a 1973-1976 V8 Dart, or similar Abody. Chicago land mopar connection member. Please post if you can help. Mopar can fly just not land well. :twisted:

You can get a replacement at true value hardware. 7/16 -20 X 2". I need a disk caliper rattle clip for kelsey and hayes, if any one has I need one. Please advise Thanks.

I have a 67 cuda orginal 273 now a 360LA. I kept the orginal steel water pump power steering brackets and alt, pulleys as original. I added a edelbrook performer manifold the one with the ac mounts. Trouble is I have never seen this AC compressor mounted on a 273 or any thing else in so long I...

I installed a headliner in my 67 FB B_Cuda but it doesn't look right. wrinkled and baggy in some spots. If I remove this thing to redo it I write down the color codes. Does anyone know who makes the best headliner? I am thinking this thing is just made wrong and I need to start over. Everyone I...