Search results for query: *

I have to thank you for the schematic that you sent me! 3 minutes and I found the problem. almost embarrassed to tell you what it was. I had the two main wires going through the bulkhead reversed. Your help saved the day. I also have a service manual coming for future reference. Thanks again, Litz

Thanks again for your input. I really appreciate it.

I'm having charging system problems with my 65 valiant and am in need of a good service manual and thought maybe you guys could point me in the right direction thanks in advance.

Thank you for the info. I have never seen anything like this. Batt. fully charged anything above idle and the amp guage goes way up. about 40 plus amps. And I cant get the guage to show discharge. Engine off, headlights on high beam and radio, etc on and the needle doesn't budge. The wiring is...

I'll try and make this as short as possible. Prior to the repaint everything on the car worked as it should. I removed all of the wiring from the bulkhead forward prior to painting leaving all components attached to the harness. After painting I cleaned and inspected all of the wiring and...

I used the truck mounts. Super easy to adapt. Thank you so much for your reply!

I need some help/advice on where I can purchase some new motor mounts for my 65 Signet with the factory 273. The only ones I can find are too thin. My originals are way thicker and I need the original style for header clearance. Thanks in advance, Litz

I got a VFN hood for my 65 Valiant. good quality and workmanship. I would recommend them.

Thank you Phillip I will be calling you in the next week or so.

I am also trying to find a source to purchase the early A Hedman Husler fenderwell headers. Tried hedmanhusler.com and couldn't find any info. tried both part numbers mentioned but came up empty. Any suggestions?

Looking for a good machine shop/Mopar engine builder in the Deer Park, WA. area. Also someone with welding skills to help with chassis mods on 65 Valiant

Deer Park WA.

Thanks for the kind words Pal. If you had read the post you would have seen that I'm in the process of moving and in a BIG hurry. Thanks for the BULLSHIT comment

Thanks a BUNCH for the info! I appreciate it.

Do any of you guys happen to have a mfg, and part # for a short oil filter for a small block (360)? The engine is in a 65 Valiant and the filter is too close to the torsion bar to remove and replace. I have an oil filter adapter but I don't have time to install it now. Just put the engine and...

Thanks Brian!

What can I use to reduce this stuff? It's as thick as molasses! A friend suggested 10% laquer thinner but before I do that I want to get some professional advice from the Pros. any suggestions would be appriciated.

Thanks for all info guys! So much for that.

I'm curious as to how many of you guys have used this product? And your opinion of it. Also what is a good starting point for air psi at the gun? Someone suggested 8-10 lbs? That seems pretty low to me. Especially since this stuff is pretty thick. I'm doing door jambs and small areas so I'm...

Can USC all metal filler be used over POR-15? Thanks in advance for the info.

Do any of you know if USC all metal can be applied over POR-15?

Thanks for the info!

Can USC all metal be applied over POR-15? Also will it bond to the factory lead work? I have a crack to repair in the cowl area. 65 Valiant Signet. Thanks in advance!

Like I said earlier I'm going to do a small test area before I decide what to do. The car is going to be painted bright red and I would like the engine bay to be the same color as the body. Hell Rustoleum makes a really bright red I may do the engine bay with that and have the paint shop mix...

The car is going to be painted RED. If it was staying white I would have painted it Rustoleum white!

I'm going to see what happens. Looks like it was prepped very well before the Rustolium was applied so I'll do a small test area before I go nuts with it. Thanks to everybody that replied. When I get a chance to try it I'll let you guys know if it works,

Thanks for the info! I'll give it a try.

I bought this 65 Valiant as a roller and the PO had recently painted the engine compartment with Rustoleum gloss black rattle can paint. I would like to have the under hood area the same color as the car so I'm wanting to get rid of the black and go with the body color. From what I can see the...

Looking for a source for a new windshield and gasget for my 65 Valiant Signet. Any help is appreciated. Thanks in advance.

Sorry Buddy. I know how it hurts.