Search results for query: *

Been kicking around the idea of switching over to led headlights on my 67 barracuda. Just curious if anyone on here has successfully made the switch and what their opinion is on them. What brand you went with etc. Any feedback would be great thanks.

My question is on a 67 barracuda do you have to load the spring as in giving it a full turn somehow for it to hold the hood open? The way it is now i have to use a prop stick and dunno if the springs are just that worn or if I just assumed wrong when I initially installed them. The car didn't...

Looking for a nice set of v-eight and barracuda fender emblems for a 67 barracuda.

Just kicking around the idea of exhaust cutouts and seeing if anyone has tried them and their opinion on the set-up. Worth it or no?

Anyone know if it was just a v-eight decal on the passenger side fender above the Chrysler symbol on a 67 barracuda? It's not a formula s or anything. Just can't find a clear enough pic to make out what it actually is and the car came with a box full of 440 decals fish emblems and barracuda...

So I'm at the point where I'm getting ready to switch over from the 67 gasket and lock bead style to the 68-69 style so I can have chrome trim around the glass. My question is does anyone have the measurements for the location of where I need to drill the holes for the molding clips. Or know...

Ok guys I finally got the freshly rebuilt 340 in the cuda wired up and ready to go and when I started it my oil pressure was around 15-20 on a cold start idle and up to 45 around 2000 rpm. I'm running 10-30 and the majority of people are saying this is super low on a fresh motor and something...

Looking for the lower rod that runs from the torque shaft to the transmission shifter arm for a 67 barracuda

Ok so I'm going with an hei ignition on a point style harness in a 67 barracuda. My question is after I bypass the ignition ballast what is a good constant power source from the ignition that's easy to access. Is it possible to use the dark blue wire that's running from the ballast I bypass or...

Need a tube for a 727 sb transmission that's in good shape that will be going in a 67 barracuda

Need a torque shaft bracket for the 67 barracuda with a console shift automatic also need lower rod and swivel if anyone has one they are willing to part with please let me know Thank you

Switched the 67 barracuda from a column shift to the console shift "automatic" and need linkage and the bracket from the shifter rod to transmission if anyone has one in good shape and willing to sell lmk thanks

Looking for a cast iron 90 degree oil filter adapter for 340

Does anyone know where to get a flexplate for a 340/727 transmission with a symmetrical bolt pattern for the converter. I'm getting 3 bolts in and the last hole doesn't match up it's about a half a hole off. I'm sure it's a newer converter which is causing the problem here just dunno if I can...

So I found an 8 3/4 b body rear end out of a 65 dodge for a pretty good price and in the pic under the 741 numbers there is what looks like a 20. Does anyone know what that means? I have an open 741 and there's nothing under the 741 case numbers but I also have a sure grip 741 with the numbers...

Anyone know what engine harness I should use for a 67 barracuda with original style dash harness and a 1973 340 motor with electric ignition? Called classic industries and didn't get much input. I seen they have a engine/forward light harness but dunno if could use that or need separate ones to...

Ok guys I need some input here. I ordered a motor mount/bracket kit from summit and they sent me a /6 to 340 conversion kit. It didn't have a slant 6 in it to begin with which makes me think if the k member is different on the /6 and I have one for a V8 it's not going to line up correctly...

Bought some motor mounts for the 340 which is a 73 and they seem to be a sloppy fit checked the paperwork and it says up to a 72 motor. Does anyone know if the mounting tabs on the block are slightly wider on a 72 then a 73? It's about a quarter inch wide for the 73 dunno if that's a common...

Hey guys I have a m1 Mopar intake manifold with the part number p4532567 that came with the car I'm restoring just looking for some more info on this can't seem to find any on the web

Any cuda owners have a 8 3/4 rear end with a 727 small block transmission? If so do you mind telling me the drive shaft length? I've read I need a 44.88 shaft just wanting to confirm that. My transmission is at the shop getting built so I have nothing to go off of measurement wise. I found a...

Getting ready to install a 727 small block transmission in 67 barracuda and want to use the lokar kickdown kit instead of linkage does anyone what length cable I'll need for this application?

So I'm needing a drive shaft for a 67 barracuda and what the length is for it I have a 8 3/4 rear end with a 489 case large yoke and a 727 small block transmission. Also need to Know if I find a stock one in good condition what kind of horse power and torque can it safely handle. If anyone has a...

Trying to get the weather stripping on the roof rails to seal correctly with the door window and having a rough time. It's almost like there was something between the body and the roof rail track to bring it down closer to the windows. Door seems to be in correct position same for the window but...

Wanting to go with a 4" stroker kit and aluminum heads was wondering if anyone had suggestions for what product to use or what's a good combination including cam and manifold also carb. Pretty new to the motor game all advice is appreciated. It's going in a everyday driver car but still kinda...

Has anyone installed a Redondo retrofit radio in their car and if so what wires d I'd you use for your constant power source and acc power source

Restoring a 67 cuda and decided to go with a retro fit radio and was wondering if I could get some advice. Having trouble on what wires I should use