Search results for query: *

I have water leaking in from both sides near the kick panels - most likely coming from the cowl plenum on my 74 Duster. Did I miss something when I had the front end off the car during restoration? Plenum drain tubes??? Thanks, John

No rust ever Arizona car. Fresh restoration with under 2000 miles. Includes fresh builds of 318 Magnum and 727 trans. New P/S pump and gear box, Pypes X exhaust, Classic Ind. interior, All new suspension with Addco bars front and rear, Updated factory A/C w/new comp / evaporator / lines /...

My next project will probably include one of the above engines along with a 46RH /RE trans or? (something with over drive ) and fuel injection. Want to hit a few bone yards in my area looking for the above combo along with the factory computer and associated wiring. My question is; what years...

Fresh rebuild. Press on pulley. Fits many Mopars. $50. John. Payson, Az

Original paint. No rust through. 1 Minor ding. Good luck finding one this straight. $100. John

Straight. No rust ever. In primer and ready for paint. $100. John

New, low back fiberglass bucket seats with covers. Pair = $40. John

From a 1974 Duster /6 motor. In good shape. Perfect for those "wheels up" launches. $50. John

Rebuilt with less than 2000 miles on it. Worked great when I removed it. $100. John

From a 74 Duster. Short block is standard bore. Ran good when I removed it, but needs rebuilding. $50. John

Complete from a 96 Dodge Dakota 318. In great shape with all censors, injectors, lines, new plenum gasket. Ready to bolt on and run. $100. John

From a 2WD 96 Dodge Dakota. Rebuilt in Sept. of 2015 with low miles since rebuild. New convertor. I got this trans with the engine ( 318 ) and can not verify the above as I have never run this trans, but seller is reliable - IMO. $150.

I have a 74 Duster. Originally a slant 6 car, so original drum brakes all around. I would like to upgrade to front disc brakes now that it has a transplanted V8 Magnum motor in it. I would like to buy a kit that would include all necessary hardware, including hydraulics. Like to stick with...

With the install of a fan shroud, the transition from /6 to 318 Magnum is pretty much complete in my 74 Duster. Other mods along the way included a 727 in place of the 904, V8 torsion bars, front and rear "Addco" sway bars, up graded A/C system with a Sanden compressor, 2.5" Pypes X pipe...

Practice, practice, practice!

Soooooo, along with swapping out my /6 motor for a 318 magnum motor in my 74 Duster, I also decided to up grade my A/C system to a new Sanden compressor and R134A. The factory style big "V" compressor used a temp/pressure controlled expansion valve on the low side which used a - 12 line and...

I have a 74 Duster that has a 1996 transplanted 318 Magnum motor in it where a /6 used to reside. It will be a daily driver with a mildly warmed up 318. Not sure where to go with the exhaust system. The stock ( 96 Dakota ) cast iron exhaust manifolds will not clear the P/S gear box. Headers...

Transplanting a 318 Magnum motor where a /6 used to live. Core support opening is too small for a V8 radiator. Any suggestions would be appreciated - before I start cutting. Thanks, John

Looking for a V belt 1 or 2 groove water pump pulley. Thanks, John

Six cylinder A body torsion bars ( 35 3/4" long and .856" diameter ) for sale. Perfect bars for your drag car. $60 plus shipping. Thanks FABO, John 928 978-1911.

Short block needs a rebuild. Head has a fresh rebuild ( new Guides, valves, springs, seals, and milled .090" ) with less than 1000 miles. Have receipts over $600. Custom aluminum intake modified for a Carter 2 barrel ( fresh carb rebuild ). Have pics of head and intake on request. Trans (...

I'm looking for a set of aluminum valve covers and intake manifold for a 5.2 L ( 318 ) Magnum motor. Thanks, John

Looking for a pair of "Mopar Magnum" valve covers ( 10 bolt ). preferably in black, but I'm open to -------. Thanks, john

Looking for a pair of conversion motor mounts for a 74 Duster to convert a /6 motor to a small block motor.

You checking ring end gaps and you find that your ring squaring tool is for 4" bores or larger and won't work with that 318? Well here is a new tool that just came on the market specifically designed for that 318 with a 3.910" bore. I have an exclusive on this tool, and there is a sale going...

for sale: Complete intake system ( Air filter to trans linkage ) from a 1974 225 Duster. Rebuilt carb. Ran great before removal a few weeks ago. $125. John

Got a chance to buy a stock 318 and trans out of a 96 Dakota truck. No clue on ether. Assume it is a magnum motor with a roller cam and an electronic 4 spd O.D. trans? Is this a good block to build from? Looking to make a very mild street set for my 74 Duster to replace the existing / 6...

About $285 invested so far. Includes manifold, carb ( carb has been rebuilt ), aluminum adaptor, Bridgeport work, welding, gaskets. It's about ready to bolt on. About 25% larger than 1 barrel. Might go with Lokar verses trying to find / fit hooky factory mechanical linkage.

Left side Duster 1/4 window frame with lock in good used condition ( no glass). $40 includes shipping to lower 48. John

Top Quality Duster floor matt set. Red and black. $45 includes shipping to lower 48. John