Search results for query: *

I am looking for a NICE rear trim panel for a 65 Valiant. The piece that goes above the bumper, under the trunk lid and between the taillights. Mins is too banged up to use on my car.

My speedo still doesn’t work because I don’t have the right cable. Does anyone know if there’s a cable I can get to convert a ‘65 speedo to a ‘73 Charger trans? Thanks!

I still have quite a bit of work left to do to get my Valiant where I want it but I’m so happy that I’ve made it this far!

I finally have her on the road! She’s not 100% complete but I just bought a house and had to mover her over so why not let it be the maiden voyage?! The drive went really well! the engine stayed under 180 degrees and the suspension rode very smooth for the 15 mile drive I took!

Ive been fighting starter issues on my 65 valiant for quite some time now, it will click weakly but will not turn the engine over Pretty much Everything is new: Starter relay Dash harness Ignition switch is not new What I have tried: Checked grounds Soldered crimp connections Jumped starter...

Hollo all, I remember a member on here advertising Bluetooth conversions for stock radios and I forgot who it was. Could they please speak up or could someone @ them?

Unfortunately, our more-doors don’t get the same love and attention as their “sportier” 2-door counterparts. This is also true when it comes to the parts department. But when it comes to your exterior door handles it’s actually really easy to convert a set of new front door handles to fit your...

Hello, Just wondering if the C-pillar moldings are the same between a 2 door and 4 door 65 valiant. I feel like they are but when I was going to purchase I was told they weren’t. Just want to confirm. Thanks!

Hello, I’m looking for a set of C-pillar moldings for my ‘65 valiant. Ones that are good cores for rechrome. Mine are so bad that all the edges flaked off. Thank you!

I spent over a month on final bodywork but the no-longer Crusty Biscuit is finally painted! A friend of mine was kind enough to spray it for me at the shop he works at

Hello all, Im wondering if anyone has any leads on a good bumper shop close to the central Florida area. I am willing to drive a bit further for a good shop and heck I would even ship my stuff to have it done. Thank you!

Hello all, I finally have the Crusty Biscuit at the body shop for paint! Everything was working fine up until I went to start the car to drive it up on the trailer. Here’s my issue: I turn the key on without starting and everything works; the fuel pump starts priming, Holley sniper display...

Hello all, Missing the last piece of the puzzle for my project. I’m looking for a really nice condition rear bumper for my ‘65 valiant. PM me or post pictures of what you have. Price plus shipping to 32927. Thanks!

I’m looking for a nice hood for my 65 Valiant. Please let me know, thanks!

Hello all, I’m still looking for a hood for my ‘65 Valiant. Kinda got burned on a couple deals with shipping. Willing to drive 10 hours for a nice piece. This is this only thing holding me up from getting my car in the booth for final paint. Thanks all.

Hello all, I’m just wondering if there are any differences between the rear wire harness on ‘64 and ‘65 valiants. Mine is a 4-door non-convertible, not a wagon.

I ordered a set over 3 months ago from POL but back order is killing me! I really want to get my car rolling soon so that I can get it on a trailer and to the body shop for final paint and don’t know how much longer I can wait. Please, if anyone has any in their stash and is willing to sell...

Im working on the brakes for my ‘65 and was wondering if my thinking is correct on how these lines are supposed to come out of the distribution block. Dual reservoir master with disc brakes. FR (front right), FL (front left), R (rear).

Hello all, I took the steering box for my ‘65 Valiant apart to check the condition of the inside but I think I put it back together wrong. To specify, I believe I didn’t align the gears properly so I think this is now causing an issue with my pitman arm. Would someone be able to describe to me...

I’m taking next week of work to get all the panels prepped for final finishing; super excited! I’m in the process of disassembling all the doors and was just wondering how I remove the plastic clip holding the glass to the regulator. Don’t want to break anything by assuming! Thanks all!

Last try before I go aftermarket... PM me

I got this in a collection of parts for my build but already had a regular one. It’s obviously a diy job but done well as far as structure is concerned. Previous owner said that it worked very well for many years on the car it was on. Asking $30 plus shipping from 32927. Thank you!

Im looking for a clean hood for my ‘65 valiant project. Mine had damage/rust that is too severe for a proper repair. Clean examples only please no rust rot or huge dents. PM me if you have something to offer. Thanks all!

I need the parts to make a proper driveshaft for my ‘65 Valiant so i thought i might as well post here. I put a 360 in the car with a 904 out of a 73 charger and i also did a Ford 8.8 swap for the axle. My question is: Can i convert my original drive shaft to work with my current set up? As far...

I need an inspection plate for my 360 to 904 set up. Thanks!

hey all, im doing a mass purchase of “little annoying parts” to get my 65 valiant closer to completion. I’m doing my brakes from scratch and was wondering what kind of distribution block would work for my set up. I have: 1) dual master cylinder 2) 73+ disc brakes up front 3)Ford 8.8 rear with...

I need the above dials for my 65 project. I have a radio that came without the dials. Thanks in advance!

I need a manual brake pushrod for my 65 valiant. Thanks all

Hello all, I’m running Sniper EFI on my 360 and was wondering how I’m to run the return. I’m using a stock tank with one of these drop in fuel pump modules: Holley 12-319 Holley OEM Style EFI Fuel Tank Modules | Summit Racing I bought my EFI kit slightly used and it didn’t come with the return...

Im going to be starting final body work on my car soon and am in need of a fender brace on the drivers side. Thanks!