Search results for query: *

  1. MoparMike1974

    [FOR SALE] NIB Sealed Power 400ci ring set

    Sealed Power PN E-318K Std 4.342" Box a little ragged but rings are in perfect condition. Lists for $113. $55 shipped 50 states, USPS money order only. https://www.summitracing.com/parts/slp-e-318k#overview
  2. MoparMike1974

    [WANTED] NOS P4120233 292/508 SBM cam kit

    Putting feelers out to see what I can come up with. I had this cam in my first car and loved it. Regret selling that engine and the cam that was in it.
  3. MoparMike1974

    Whats wrong with this picture?

    Building a chubby 350 for a chevelle were restoring in the shop. Went to put bottom end together today and found this oddity.
  4. MoparMike1974

    [WANTED] 73/4 Roadrunner hood insert

    I need the plastic insert for the passenger side RR hood insert for the bulge hood. I only need the plastic insert but would consider the whole potmetal piece or a pair if the price is decent.
  5. MoparMike1974

    Is there any value in a 3 speed manual trans?

    I just bought 3 cars and about 6 truckloads of parts. I will be taking many parts to MIR swap meet in october and need to know if a 3 speed is worth hauling there. Do they have any internals that interchange with the 833?
  6. MoparMike1974

    Need a measurement on E body ASAP. Radiator to rad support height.

    Not an A body but I already posted it on the E body forum and figured I would double my chances. Im in the process of custom fitting an aluminum radiator in my 71 cuda. The radiator bolted in fine but needs to be raised up quite a bit to use the factory shroud. So im looking for a measurement...
  7. MoparMike1974

    Does anyone make the spring for the key release collar?

    As far as I can tell nobody makes these. You can buy the collars to convert a column shift to floor but nobody seems to sell the return spring.
  8. MoparMike1974

    Pinhole leak in gas tank

    I have a little rust in my fuel tank. What is the best sealer to fix this? I heard por-15 is good stuff.
  9. MoparMike1974

    Who is coming to MIR this Saturday?

    I will be there selling parts, look for me in my red '05 ram. Im going to throw my rusty dart sport in the show just for the hell of it. https://goracemir.com/schedule/calendar/2022/22-10/22-10-22.htm
  10. MoparMike1974

    How to tell if flywheel is iron or steel

    I have a 11" flywheel from a 69 383 that i'm thinking about using. I'm sure its not the original wheel but i'm not sure if its iron or steel. It has the numbers 40 30467 stamped into it but I haven't been able to find anything online. The pressure plate was yellow and diaphragm type. Is there...
  11. MoparMike1974

    Any 833 guru's to help out?

    Im working on gathering parts for my 4 speed install in a 71 cuda with 440. It will have a new aluminum lakewood bellhousing and I plan on running TTI headers and 11" flywheel. I mention this because it pertains to one of my questions. So here are a few things I am confused on. 1. Are the E...
  12. MoparMike1974

    Anyone use these axle repair bearings?

    I was looking for axle seals on rock auto and came across these. Never seen them before and im curious how they work. Looks like there is a seal on either side of the bearing. More Information for WJB WBRP6408 My dart has a leaking axle seal and the seals were replaced around 4k miles ago. So...
  13. MoparMike1974

    I have been doing body work all wrong.

    I had no idea this was how its supposed to be done. Learn something new every day :) The guy sounds like McLovin
  14. MoparMike1974

    Help identifying 4 speed transmissions

    I have five 833's and im trying to ID them. I need to find out which one would be best for my 71 cuda. I think two are E body and one A body. The others im not sure of. Four of these have pads with numbers but one does not. Im posting pictures of the one without numbers. Here are the numbers...
  15. MoparMike1974

    Out of hibernation...the start of a new restoration.

    Sorry its not an A body but here is my cuda that I have owned for about 20 years. It spent the past 4 or 5 years buried in one of my 40' connex boxes. After three days of moving stuff I was finally able to get it back in the daylight. Im happy to finally get started on it after all this time...
  16. MoparMike1974

    340 spotted in music video

    Europe - The Final Countdown (Official Video) Pause video at exactly 0 minutes, 9 seconds to see a 340. I posted a direct link but it wont work.
  17. MoparMike1974

    WIW: RB "906" heads

    I have a couple sets of big block 906 heads im taking to the swap meet in october. I dont have much experience with big block stuff and would like to know what they are worth. Original heads off engines that will need to be redone. So what are core 906 heads bringing these days? I also have a...
  18. MoparMike1974

    Mopar Eastern Classic October 23

    Who's going? I plan on putting my Swinger in the show and will probably get a couple vendor spaces. Maryland International Raceway
  19. MoparMike1974

    [WANTED] Spare tire hold down cup

    I need the cup that goes under the wing nut to hold the spare tire down. 72 swinger but im sure its the same for many years/models.
  20. MoparMike1974

    440 stroker build, have some questions

    I will be building my first big block for an upcoming project and need some advice on piston selection. Im starting with a brand new callies RB block, so standard bore. My delima is 440source does not carry std pistons, only .030+. I really hate to bore meat out of the block if I don't have to...
  21. MoparMike1974

    Callies RB block

    Just talked to Mancini and they are starting to receive the new Callies RB blocks. Mine ships tomorrow. Anyone on the pre-order list may want to give them a call. Will follow up with some pics when it arrives.
  22. MoparMike1974

    Today is a good day

    Yep, its four twenty six. Hemi day! Hurry up, its almost over.
  23. MoparMike1974

    8.25 vs 8.75 rear, driveshaft length the same?

    I want to swap the 8 1/4 for an 8 3/4 in my 72 satellite. Is the driveshaft the same between the two?
  24. MoparMike1974

    RIP MSD 6C

    My 340 dart sport died suddenly on the way home from work today. The old MSD 6C took a dirt nap. A moment of silence for 6C, he was a good ignition box and a good friend for many years. An autopsy will be performed tomorrow. Hopefully I can provide some answers.
  25. MoparMike1974

    Attn: 73 (V8) swinger owners

    Im ordering a new door vin sticker and I need to know the GVWR, GAWR(front) and GAWR(rear). VIN Data Decal (1972-89 Mopar Vehicles)
  26. MoparMike1974

    Weird hardware with new 440 six pack intake

    Just got a new edelbrock six pack intake and there is some strange hardware in the box. The parts are listed in the manual but no other mention of what its for. Anyone have any idea? I don't recall ever getting any hardware with any intake manifold before. FP1 shoulder studs F262 shoulder studs...
  27. MoparMike1974

    [WANTED] NOS 73 Dart RH headlight bezel

    Im looking for an NOS RH headlight bezel for a 73 dart / dart sport. NOS only, have plenty of used ones. Only need RH but will consider a pair.
  28. MoparMike1974

    426 Hemi blocks back in production

    Got an email from Mancini today stating there will be more iron hemi blocks soon. Damn, now I have to rethink my engine options once again. Mopar HEMI & Wedge Engine Blocks
  29. MoparMike1974

    [SOLD] Bluetoothed A body AM radio

    Just finished another bluetooth conversion on an A body AM radio. Amp is rated at 50w per channel and will drive a pair of 6x9's fairly well. Front of the radio retains original appearance. Original on/off/volume knob operates the radio. Three of the 5 tuner pushbuttons operate the bluetooth...
  30. MoparMike1974

    Picked up a few new ones today

    Well, needed more cars like a hole in the head. Not A bodys but still some cool mopars. First is a 71 383 RoadRunner air grabber car. Has HP 440 in it currently. Car is partially disassembled but all parts are there. I bought this car and was kinda talked into a package deal for the other three...
Back
Top