Search results for query: *

Selling my 1964 Plymouth Valiant 200 convertible. I've owned it for a few years now and life just hasn't allowed me the time to drive it. I live at the Jersey Shore and, unfortunately, don't have a garage, so the car spends the majority of its time under a cover in my driveway. To be honest...

I'm considering wrapping my '64 Valiant convertible instead of painting. I understand that the purists out there may be cringing at the idea of vinyl-wrapping a classic, but I live at the shore, and if the price is right (under $1,000), it could be an advantage given the corrosive salt air...

I have a radio delete plate for an early A-body in good condition. Believe it came off of a 1965 Dodge Dart originally. $50 plus shipping.

I have a brand new in the box (never opened) convertible boot from ACME Auto for a 1963-1966 Plymouth Valiant. Color is red (not dark red). Material is Sierra Vinyl. Sample of color and material, as well as part number, is attached. Rock Auto sells them for $179.79. Asking $140.00

I have a disassembled 8 3/4'' rear with 3.23 gears and a Sure Grip unit housed in a 741 case. Backlash on the unit was recently checked and is within factory specs. Unit is very tight. Axles are small bolt pattern (sbp-5x4''). Housing was just sand-blasted, primed and painted and never...

I have one bucket seat for a 1964-65 Plymouth Valiant/Barracuda or Dodge Dart. This is a passenger side seat. Seat is in very good condition. Red upholstery. I originally purchased this seat on ebay. Paid $100 plus $85 for shipping from California (ouch!) Would like to recoup $125. Not...

1966 Valiant convertible on CL. https://jerseyshore.craigslist.org/cto/d/matawan-1966-plymouth-valiant-signet/6841621784.html

Hey all, I'm looking for what I think is called a heater box door for my '64 Valiant. There is a missing 'door' approximately 5'' or so on an assembly under the dash by the clutch pedal that is constantly blowing air on my left foot. Not sure why the need for a door, just know I want to seal...

Looks pretty clean. Located in Aberdeen, NJ. 1966 Plymouth Valiant Signet Convertible

Just getting back into Mopars, so I'm not exactly sure whether I have the flanged output shaft to accommodate a trunnion ball u-joint (specific to 1964 and 1965, I believe) but anticipating this is the case, I need to know what exactly needs to be done to make the conversion to the more popular...

Selling a heavy duty center section for a Mopar 8 3/4'' rear. This unit comes with a '489' case, which is considered the strongest due to its 1 7/8" pinion gear (compared to the 741 case at 1 3/4''). Equipped with a 2.94 gear ratio and an open differential. Spins smoothly with no 'play' in the...

Selling a heavy duty center section for a Mopar 8 3/4'' rear. This unit comes with a '489' case, considered the strongest due to its 1 7/8" pinion gear (compared to the 741 case at 1 3/4''). Equipped with a 2.94 gear ratio and an open differential. Spins smoothly with no 'play' in the gears...

Hey all, I am selling a center section for an 8 3/4'' rear. Appears to be a tight unit with no play in the gears. The case is a '489' with an open differential and 2.93 gears. Looking for $350 or best offer.

Hey all, I'm looking for a set of taillight lenses for my '64 Valiant in very good to excellent condition. My current lenses have stress cracks throughout. Just tired of looking at them. Also, if anyone knows a of a company that manufactures reproduction lenses, please let me know. Thanks..

Hey all, in the middle of swapping out the old 7.25'' rear for an 8 3/4'' in my '64 Valiant. Looking for a pair of clean and useable 10 x 1 3/4'' brake backing plates for the small bolt pattern. Bueller...Bueller...anyone? Drums, shoes, cylinders and hardware I'm able to get through Rock...

Is anyone running a 3'' exhaust on an early model A body? I'm having difficulty finding any company that even makes 3'' tailpipes for this unique application. Let me know. Thanks.

Hey all, Sounds like an odd (and very specific) request, but I am looking for a driver's side bucket seat for a 1964 Plymouth Valiant, ideally in bright red that is in very good to excellent condition. Would consider two of the same and even the rear bench as long as all upholstery is matching...

Just stumbled upon a bargain this morning: Mittler Brothers is selling 30- spline aluminum spools for $60. They also have 35-spline spools. Not sure, but probably the same cost. FYI-Strange and Richmond are three times the price. I've never had a spools, but for those in the market...

I'm finally getting around to putting an 8 3/4'' rear into my 1964 Plymouth Valiant. The one I bought has a damaged metal brake line. Since I'm ousting it anyway, would the line off my 7 1/4'' fit? The rears are the same width and I'll be reusing the 9'' drum brakes, but just didn't know if...

Hey all, I'm looking for a factory radio delete cover for my 1964 Plymouth Valiant. All conditions considered. Thought about installing a radio, speaker, wiring, etc, but I kinda like the pared down, austere look-all business. I believe the piece original to the car was silver/stainless and...

Hey FABO, Looking to sell or trade my 1964 Plymouth Valiant 200 convertible. Trades considered: 1964 Plymouth Fury, Sport Fury or Belvedere (hard top or convertible, any condition considered). My Craigslist link is below. Thanks. $6500 or trade. (price added by staff) 1964 Plymouth Valiant...

Can anyone recommend a manual transmission specialist in the South Jersey area? My A833 needs an overhaul and I want the job to be done right the first time. Thanks.

Hey all, I'm looking for advice on the best manual transmission additive that might end or lessen some nasty sounds in 2nd and 3rd gears (feels and sounds like I'm shifting through marbles). 1st and 4th are fine. Could be a synchro issue, but I'd prefer to hedge my bets and look for the...

Hey all, I'm looking for a company that sells either an aluminum (ideally) or steel 'Ramcharger' hemi-style scoop for my 1964 Valiant. I'll go fiberglass or carbon if I have to, but would rather keep it all metal. Thanks.

Hey all, I'm attempting to replace my existing 5/16 fuel line with 3/8. This project began after I purchased an Edelbrock carburetor, and found the fuel inlet was the larger 3/8'' diameter. I figured I would just start replacing the existing line in stages: the first stage will be removing...

I appreciate the advice received on Edelbrock carburetors, but now have another question: For a street application, what are the pros/cons to going with an electric vs manual choke? FYI-My prior carburetor didn't even have a choke, so I'm pretty flexible on this issue. I like the idea of...

Anybody have any experiences (positive or negative) to share about running an Edelbrock 4-barrel carburetor on their Mopar? I was looking at Holleys, but was intrigued by the Carter-like appearance and simplicity of the Edelbrock Thunder series. Thanks.

Hey, Has anyone installed a Holley Street Avenger carburetor on their car recently? Not sure what makes it a performance carb. I have some Amazon gift cards to cash in, and they have a decent selection of Holley products. Carb comes in 670 cfm, which seems to be appropriate to my...

Has anyone ever replaced a plastic rear window in a '64 Plymouth Valiant or any other early A body convertible? Just want to know the level of difficulty and the name/s any company that makes a reasonably priced quality product. Thanks.

Selling my 1964 Plymouth Valiant 200 convertible. Power top, power brakes. 318 engine with a Performer intake, newly rebuilt Holley 650 double-pumper, and 340 HP camshaft. 4-speed transmission with a new Zoom clutch, pressure plate and throwout bearing. Red on red with a white power top. New...