Search results for query: *

10.79 at 129 mph on stock lift spring enough said

indy top end 245cc like said earlier indy intake 3/4 inch mill off to fit under hood scat 4 inch crank scat h beam rod flat top forged piston crane ,630 lift roller cam 272 and 282 dur comp roller lifter harland sharp 1,6 rocker 10,57 cr. ( not enough but street car ) it made 647 hp on 91...

like i said earlier they dont have a part number for those rockers but if you call them they are make you a set !!! thats what i did and ran for maybe the last 3 years !!!

i bought a pair few years ago , cnc version. i made 647hp on a 410 at 10,52 cr and a crane .630 lift @ 272 int 282 ex dur no leaks so far and engine run strong on the track and street !!! some said they were leakers but not a drop for me as rockers i use harland sharp 1.6 ratio and same...

Could you and which paint did he used (dupont,ppg)??? And if it is could he ask for the recepies

I did it thuesday darker than mine Car was paint 10 years ago with dupont so... the guy at napa also came and scan the door,rear fender and the trunck lid it end up with a porshe code and its grayer that what I have on my car my painter will try to mix the dupont and ppg to get close to mine

I dont know if it is water based paint that cause this problem but it pissibg me off car was paint maybe 10 years ago and still nice but a i remove the fiber glass fender after being able to find steal one noe they are ready to be paint cant find the paint they are suppose to come home and...

Need help went to napa for buying paint for my car the paint code is fc7 plum crazy purple they told me they cannot make anymore that paint , dupont no longer have the recepies to make it does someone can help me out dont tell me to go else where to buy it where i live there is not much...

so when doing a front brake swap I will need the newest version of lower ball joint ?

does someone know the difference between in lower ball joint in early et later a body thanks Bob

Do you still make and sale striping ??? Need the 340 wedge hood decal with the wedge in red

Thanks

Does it have a diference between the years in a body for hood hinges reason i ask is on my car 1971 duster i have 1974 hinges the bolt hold are slotted and the right one begin to be tired as i can say and i found an other set of hinges in my garbage stuff laying around but the bolt hold...

They dont fit Arent the same side marker as a 70,71 and grill support arent the same either ! Thanks If you ever see something else!

Saw nothing !

Need front left fender for my 1971 Duster Tell what you have Thanks Bob

but mine is 5.7 hemi and yes it s a really good thing to know if I decide to intall the 32 teeths crank reluctor I will have to see if on the cam they are identical from the 2007 to the 2017 but Im sure they is a diference because the cam senser and the crank senser should speak the same...

they dont sale the tone ring as far as I know and saw

hi I have a 2007 ram with noisy hemi bought a 2017 junkyard engine to replace the tired one knew I hade to replace the front covert to keep A C compressor in place but found out the crank reluctor arent the same either the 2007 have 32 teeths and the 2017 have 50 plus teeths so the pcm will...

what do you think about them does someone use them how do they flow what kind of intake and rockers bolt to them

QFT are making great pump but ounce again the price is there ! HOLLEY are making the gerator pump but as I know they dont last for long !!!Holley HP Series Fuel Pumps 12-125 there is one a little bigger but it have the same problem of longetivity so... magna fuel , QFT , WELDON are the way to...

to big of a line and the pump have a harder job for pushing the gaz under hard acceleration , like I said you should decide on what ever pump you wanna run with the built your making there and run the line the pump builder he is sugesting you I ran the same pump for the last 12 years ( holley...

go with #8 line so you aint gonna need to do later you should also make a decision on brand and wich fuel pump you're gonna use diferent fuel pump need diferent line so...

do you remember the size of it will it be important to make the return line #10 size line because Im using the stock OE tank sure I have the 1/2 sending unit but no return line to the tank yet what did you do to yours do you remember the way you installed it ?

Im going with the one from schumaker with the lock in them

does it need a return line from the pump or from the regulator?

thanks quick fuel is a good company for carbs but is it as good for fuel pump ?

already have an holley black electric fuel pump for the last 10 years dont have any problem with it but its noisy I dont know if Im getting old but for a quick and short ride in town its ok but a for a long ride with wife and kids its so loud and Im tired of it what do you guys suggest me...