Search results for query: *

  1. Michael Nelson

    Dart Sport window play

    I have a 74 dart sport and I have had this issue with no solution. My drivers window has play between the fabric trim that's screwed to the actual door and the interior trim. My passenger doors gap is super tight and has no play while drivers is like 1/4 to 1/2 and if I max out the adjusters up...
  2. Michael Nelson

    [FOR SALE] Functional Deluxe Dash with harness

    I have a nearly complete dash out of a duster. Has cluster. woodgrain trim, aka not base dash. it's missing the heater controls, dash pad, and cig tray. All the gauges were fully functional, and all lights worked, too. Was painted black originally tan. Also included is a small box of extra gauge...
  3. Michael Nelson

    [WANTED] Mopar a body ralley dash frame

    I'm looking for any year ralley dash frame. Was going to convert a standard to fit the cluster but with school and work not enough time. Seeing if anyone has one before I jump in and attempt to do it. Looking for a black one but will repaint if necessary.
  4. Michael Nelson

    [FOR SALE] Duster Dash with harness

    I have a nearly complete dash out of a duster. Has cluster. woodgrain trim aka not base dash. it's missing the heater controls, dash pad, and cig tray. All the gauges were fully functional and all lights did work too. Was painted black originally tan. Also included is a small box of extra gauge...
  5. Michael Nelson

    Rear glass 74 Dart Sport

    I have a 74 dart sport(duster) and I'm literally about to blow a cork. How do you install the window. I can't find a video online of a duster. When I get close the bottom or top gap won't close then the gasket pops out when trying to push it tight and I have to restart. Do I glue it to the...
  6. Michael Nelson

    A833 trans gear question

    I have a a833 non OD trans and I just took it out of my car to inspect it over and clean all the cake off of it. Some of the gears have three slits on all the teeth all the way around in the exact same positions. No metal and no bits. They definitely look machined, but other pictures I've seen...
  7. Michael Nelson

    [WANTED] 1973-76 Dart Sport Tail lights

    I'm looking for a clean set of dart sport tail lights, housings, and bezels. From 1973-76. Located in trevor Wisconsin 53179
  8. Michael Nelson

    [FOR SALE] Radiator

    I have a radiator out of my 74' Dart Sport 360 4spd. It's in good condition, no leaks or visible damage. Going in a different direction and no longer need. Asking $75 Located in Trevor Wisconsin 53179
  9. Michael Nelson

    [FOR SALE] Duster/Dart Sport rear bumper and shock mounts

    I have a straight and clean rear bumper for Dart Sports and Dusters with the shock mounts. The chrome is in decent shape for its age, has some over spray from my car on it but it cleans off. No bends or dents. It's complete. Asking 100 Located in Trevor Wisconsin 53179
  10. Michael Nelson

    [WANTED] Duster/Demon/Dart Sport rear bumper

    I'm looking for a 1970-73 rear duster bumper. Not 74 or later, not looking for the fat bumpers Looking for driver quality. Located in Trevor Wisconsin 53179
  11. Michael Nelson

    [WANTED] Holley 2bbl side hung float bowls

    Hello everyone I'm looking for two Holley side hung float bowls. Specifically the style like photos below. I'd prefer the 2bbl ones because the 4bbls will need to be sealed. Located in Trevor Wisconsin 53179
  12. Michael Nelson

    [FOR SALE] 1974 Duster/Dart Sport dash and complete wire harness

    I have my dash and nearly the entire wire assembly from my 74 dart sport, from the tail lights to the headlight. It's been cut into a few times but everything worked before I pulled it out. Only things on the dash that aren't included is the temp control the ash tray and the dash foam. Vin tags...
  13. Michael Nelson

    [WANTED] 73-76 Duster bench seat slides

    I'm looking for a good solid set of seat adjusters, the set I have all the studs are broken off and it's kinda jerry rigged. Looking for functionality over looks. Located in Trevor Wisconsin 53179
  14. Michael Nelson

    [WANTED] Six pack air cleaner

    Hello everyone I'm looking for a six pack air cleaner. Mainly interested in the bottom, steel or fiberglass, not looking for any numbers specific stuff. Just a young college student, looking to see if any are cheaper than the $450 repo's. Located in Trevor Wisconsin 53179
  15. Michael Nelson

    [FOR SALE] 8.75 Center Section

    8.75 center section, ratio is 3.23 Good shape no play or chips in teeth. 657 case aka an older 741 Open dif. $125 Local pick up only Trevor WI 53179 (Pictures are mine, didn't have any available on laptop, I have it listed other places)
  16. Michael Nelson

    [FOR SALE] Duster, Demon, Dart Sport Black Interior Trim Parts

    I have a nearly complete interior for a 70-76 duster Demon and dart sport. Some of the trim was dyed black others are originally black, overall everything is in good shape, the a pillar is starting to degrade a bit and one kick panels is a bit melted, I'd include a nother set that's in better...
  17. Michael Nelson

    [FOR SALE] 73-76 duster/dart sport interior trim parts

    I have nearly a whole interior trim set for a 73-76 duster/dart sport. Will fit 70-72 but not original. All trim except for kick panels and rear quarter cards are originally tan. Those two are actually black. The a pillar trims has degraded a bit and one kick panels has melted a bit but...
  18. Michael Nelson

    [WANTED] Duster/Dart sport quarter panels

    Im looking for a set of quarter panels for my 74 dart sport. looking to see what's available before I buy online. I'm in Trevor WI Zip:53179 and if its close enough I will pick up.
  19. Michael Nelson

    Possible camshaft ID 360 street build

    I bought a Dart Sport 360 with a hot little motor in it. I was only given this info; Duration is 250, and Lift is 488. It has a lot of work done to it. I know it's an older build. I pulled the intake off and don't know where to look for part numbers. Though at the back of the shaft, it has an...
  20. Michael Nelson

    Six Pack Carbs?

    I recently obtained a direct connections six pack intake. My question is what would be the best choice for carbs mechanical vs vacuum. Can I Frankenstein some different two barrels to fit. Not trying to be cheap but part numbers don't matter, I want to use it kinda soon and I'm a college...
  21. Michael Nelson

    Not able to engage gears when running

    I have a 74 dart sport with a 360 and a 72 A833. I was driving and it made a weird grinding noise. I was in 4th gear. I slowed down and put it in neutral. After I Parked it I went underneath and saw that the nut for 1/2 gear was loose, I tightened it and it seemed good. I was able to shift from...
  22. Michael Nelson

    [FOR TRADE] B body bench or buckets for trade

    I have a split bench with armrest out of a what I believe 73/4 charger, and a set of buckets out of a similar car. The bench has the seat rails of of buckets to fit into the a body holes (it’s what I had to do at the time so I could shift). The seat is solid and just needs a reupholster, the...
  23. Michael Nelson

    Help Painting dash trim!

    I'm having trouble painting the wood grain trim that goes along the whole dash. I did the proper cleaning and prep work, I used Rustoleum plastic primer and it stuck great. After it dried I taped some areas off for detail work, I used painter's tape and I didn't even press it into the paint...
  24. Michael Nelson

    Hello everyone!!

    I'm mike, a few weeks ago I bought a 1974 dodge dart sport, factory 360 and 4 speed. I'm excited to finally join this community! She might be a little rusty dusty and crusty but she's mine. This is the only picture on my laptop, we had some crazy weather right after I bought it. But don't worry...
  25. Michael Nelson

    Hazzard and tail light issues

    I'm new and a few weeks back bought a 1974 dodge dart sport 360 4 speed. The electrical worked but was kinda janky. I pulled the dash harness out and cleaned it up. Made sure I didn't screw any of the wiring up. But maybe I did, now I don't have brake lights or hazards. When I used my...
Back
Top