Search results for query: *

I was thinking the other day about the "How to" thread section we have and how many do it yourself people are on this fourm. I was wondering after looking through the "how to" section if there would be any fellow member(s) that would be willing to do some basic body and paint how to(s) for...

Hello, picked up this 70 Duster. I don’t have any history on the car, but I picked it up after it was abandoned on the street near a work site. It looks to have complete interior that I don’t have photos of. Whoever owned it before welded the front and rear metal bumpers to the fenders and...

Hi y'all, Has anyone used Doug/TTI headers in a stock K frame setup and had any issues with them fitting in the car when swapping to a HDK or QA1 etc? With all the companies making suspension-specific headers, I really don't want to have to buy new headers. I am looking to get a set of...

HI guys, Please take kindly to the title as it's an attention grabber to get some of the old heads in here to help out. I will clear the air before we get that one guy in here, my plan is to build a 73 Duster Multi purpose car that I can drive on the street/weekend/Road Race (laguna, sears...

What are you guys running on your 6.1 intake setup for a throttle cable and how? Thank You!

What are you guys running on your 6.1 intake setup for a throttle cable and how? Thank You!

Hi everyone, lots of people on here might remember me. I was a very impatient kid who never had the time to look things up for myself because I knew someone like ou812, crackedback, 70aarcuda etc would chime in with the perfect response. Each of them had their own vibe about them with how they...

This is Project Whirlwind . A littler introduction. The car used to be yellow when I bought it back in 2006. It was a 318 car with bench seat (that was broken) and a 904 transmission. It was my first car that I purchased with my own money that was saved from kindergarten believe it or not. I...

Does anyone happen to know if those safelite places etc can get replacement glass for our cars? I’m looking to have my glass instslled, but also get a new front windshield

Looking for one with no cracks or chips. I am in Northern California

Been a member on here for awhile, off and on. Little background on myself. I was a Porsche mechanic for Singer Vehicle Design, where I was lead Aftersales Tech for a bit before departing and working part time at a speed shop called E-Motion Engineering with former Sebring Winner Joey Seely...

Hello! I have some measurements, but I am wanting to double check with you guys to see what length driveshafts you have been running (length wise) to see if I’m in the ball park. I always like to double check

Let Me know what you got! I need the rear upper pieces and front lower corners!

Hey guys! Looking to get some help out here in Huntington Beach. Seeing if anyone knows someone who can rebuild a steering column? And maybe my 489 chunk too

I have a 6.4 with 40k miles. Along with it comes mildon pan, baffle, and pick up. Also comes a ported 6.1 intake manifold, LS throttle body believe its 92mm. Also comes with stock headers and oil pan if wanted. Engine is only missing alternator and some coils. Engine ran when pulled. ill sell...

i have a sharktooth grill that I purchased a while back and I’m looking to sell. The tabs are all in good shape, except maybe one on the bottom of the grill. The teeth are all there and have been repaired if damaged. The grill will need a light sanding of the filler work done but it’s basically...

Looking for a floor shift column please! I need one for a 73 duster I was trying to convert mine and I collapsed it

So I have the usual problem of the green bearings keeping the axle from searing by about 1/4 in, I would remove the thrust block, but there is a chance I may go back to tappered later. Is it better to cut the axle instead, so that both style bearings fit regardless?

Look for the following parts: Interior: Rear window trim Headliner bows and clips Rear upper Pinchweld panels Front Passenger vent window seal Front and Rear Door Panels any color, good condition A/C Controls Exterior: Dart 270 and Custom 2 door molding, door and 1/4 Driver Fender All I can...

Hey guys, need some help. I'm having a hard time finding all the correct trim to fill the trim holes on my dart and I was thinking of just filling the holes, but wanted to know what the best way to go about this would be? I was told if I welded them, that I am going to have to skim the entire...

Does anyone have both sides of trim for a Dart custom? I am debating filling ALL the holes for the trim or putting the trim on to give some contrast. If you have it all and the tabs are good, please let me know!

I am having a hard time turing one of the wheels on the recently installed rear. There are tapered bearings on the axles. It's pretty hard to free spin. I didn't see any adjusters on the bearings, any suggestions on why one wheel is so hard to turn? Also no oil in rear right now

I need help figuring out how to get my b body rear centered in the car. I bolted it in and it's half inch closer to one 1/4 than the other side, looks like the leafs are twisting a little more than i remember then doing on my duster to use a B body rear, any ideas or solutions BESIDES moving the...

let me know what you got! I need them asap

i need 8.25 shock plates please in good condition, dirty is fine of course

I have a friends car whose engine has been sitting for 7 years, in the car. Looks like it was never completely flushed before sitting and now there is probably some rust build up in the jackets. I wanted to hear opinions on filling engine with vinegar for a week and letting it sit and then...

Well I will be picking up a 383 short block. It was a 2 barrel engine with low compression. I was wondering what some suggestions would be to get around 450-500hp. If it was the 4 barrel I know I could follow 383 Engine Restore - Tech Articles - Mopar Muscle Magazine this, but not sure it will...

want to sell the /6 and trans out of my 69 dart. I was told it ran but i have mo knowledge of anything wrong with it. I would like 200 obo. I am in San Jose, CA

if you have one in california or bay area let me know please!

I need either please