Search results for query: *

I was just looking for an option that would bolt on for simplicity sake.

SSBC only shows kits for 72 and older models with 10” drums, not 73 and up. Unless I’m missing something.

Are there any 73 and up drum to disc conversions that retain the large ball joint, 10” drum spindle?

I think he is referring to my statement about the Lucas causing the issue. All I know is that when I pulled that valve apart, it was full and sticky goo that was not all oil. Felt very much like the Lucas I had put in. I don't know if that caused it or not, but I won't be using any more oil...

Last week, I topped my oil off with some Lucas. What I think happened is that Lucas got into the relief valve and stuck it. I thought it was a faulty gauge making my oil pressure run near zero at idle and only around 30 while driving. I replaced the gauge and started the car several times...

It does not appear that Champion offers a radiator with the hose routing for both radiator hose on the passenger side for the slant six. This is why I asked about products from Radiator Classic. I will look into Champion and see what I find out...

Has anyone used one of the aluminum radiators off ebay made by Radiator Classic? Any info on fit, finish, performance? This is going in a '73 Dart with a slant six so I would prefer to get one that has the hoses routed on the correct side.

Does anyone have a good source for a heater blower motor? All I am being able to come up with is generic looking motors that I'm not sure will even fit.

I am looking to get a new timing light. I would prefer one that has a tach read out on it as well. I have read various reviews on lights with a lot of conflicting information as far as positive and negative reviews. I don't want to break the bank but want something that will last and give...

I tightened my connections at the ammeter today and took it back up to oreilly's to test it. They took the readings off the battery. It showed the alternator to be putting out 12.8 volts and a reading of less than 30 amps. I am going to pull the alternator in the morning and have it tested by...

The car sits under a car port, so I am just looking for something to keep the dust off. I looked at California Car Covers but they are a little more expensive than I was wanting to spend. Any other suggestions?

I am looking into getting a car cover. Do you guys have any suggestions?

Today, I hooked my battery up and found that the car is charging very weakly or not at all. The alternator shows to be charging. I reached behind the dash and wiggled the wiring to the ammeter, which is aftermarket. I was able to wiggle it and then the car had no power at all. I wiggled it...

I have some broken molding clips on the rear window of my Dart. Does the rear glass need to be removed to replace these clips that hold the rear window trim on?

That answers my question then. I am looking for a brake kit that will let me keep the drum spindles and would let me keep my 14" tires. Doesn't look like this exists unless it is ssbc and they are just too expensive for me. I know I could use factory items but I would have to change the...

I have been speaking with scarebird about their kits. I have a 73 10" drum equipped dart. Their kits are for 65-72 models. They say that the kit will not work on my 73. Is there a difference in the spindle between 72 and 73?

What is a good donor for 15" plain steel wheels? Has anyone temporarily ran 15" on the front and kept the 14" on the back? That might be the way I have to go until I convert the rear to BBP.

It is my understanding that the wilwood kit will NOT clear 14" wheels. Is this correct?

71blueduster, that looks great. That looks exactly like what I would want to do. What size are the tach and speedometer and what size are the other gauges? Did you relocate the headlight switch and wiper control?

$100 is in my price range. I would be interested in seeing how to make blinker and brights indicators though. Dan, what did you make your faceplate out of and how did you attach it to the scrap bezel?

I have been wanting to add an aftermarket gauge set up to my 73 Dart for a while now. I want to place a tach, speedometer, ammeter, oil pressure, fuel level and water temp gauges in the original gauge cluster location. Has anyone modified a gauge cluster and done something like this? I...

So the angle tabs don't mount through the shock bolts?

From the Just Suspension website. Front Sway Bar Kit 596 SKU: SB596 Product Notes: Mounts in the factory location, but has a larger diameter. This sounds like the bar for a car with a factory sway bar?

The instructions that came with the bar are not the best. Step 1. Pass the bar through the opening in the k-member. (Does this mean over the brace that runs from the k-member to right below the radiator?) Step 2. Bolt the adapter plates into the existing holes in the k-member. (No...

Does anyone have pictures of the 596 bar installed? Where does it pass through the k-member? Where do the end links attach? The lower shock bolt?

Does anyone know the part number from addco for a sway bar for a 73 dart? Is it 150 or 596? 73 dart that did not come with a sway bar from the factory.

Should the bucket out of any model mopar with the same size round headlights interchange?

While I am snagging the disc brakes off an Aspen, would the wheels work on my 73 Dart? Will the offset be correct? I am also thinking about getting the rear out of this same car. I know it will be wider, will the wheels work in the back?

I would think any gain would come from greater heat dispersion?

How much better do the larger 11.75 inch rotors perform over the standard A-body discs? Is it a noticeable difference?