Search results for query: *

I am selling 4 pieces of trim and 2 wiper arms as removed from a 1963 Valiant. The 2 short pieces are the front fender trims, the 2 long ones are the tops of the rear quarters and the wiper arms include the chrome nuts. All pieces are in good shape. The 2 rear side quarter spear trims have been...

I am selling a radiator and steel shroud as removed from a 1963 Plymouth Valiant with a slant 6. It measures 18" across and the number on the tank is:2445620. The steel shroud is in good shape and I tried to find out about it but to no avail, but it was made to fit the rad. Overall everything is...

I am selling a manual steering box I removed from a 1963 Plymouth Valiant. It is in good shape but needs to be cleaned a little more. the pitman arm will be included and might still be usable as it still feels tight, but your call. $75 plus shipping from Pinckney, Michigan. Thank You!

I am selling a 340 block date casted 9-26-72 that was stated as from a Cuda. It was cleaned, bored +.030, and new freeze plugs and cam bearings installed then left to sit (not by me). It now has surface rust that should be easily cleaned up. I'm asking $600 and its located in Michigan. PM me...

Thought I would share a pic of my car I found from the Mopars at Milan day. Usually my car never makes the pic sites and I thought this was a cool one!! Plus a starting line shot!

I have 2 22" fan shrouds for sale both with part numbers of 2785614 that fit 68-69 A bodies with 273,318, 340, & 383 engines. The one on the right has some orange over spray in a couple places and a small scuff area on the top right. The one on the left is a little cleaner and has a very small...

I have for sale a 1970 340 AVS carb that would be correct for a Dart, Valiant, Challenger or Barracuda. I was told is was off a Challenger. The number is: 4934S and still has the original carb tag. It is in good shape and was on a 360 in a daily driver that was parked 3 years ago. Everything...

I have for sale a used LD 340 manifold that was removed from a 360 motor. It was in a dodge van that was a daily driver up until 3 years ago. Its in good over all shape but has 1 broken bolt in the coil mount, and the inside carb bolt holes a couple have been heli coiled. It needs to be cleaned...

Don't know if my broman thinks he is flying under the radar here but Happy Birthday Geof aka Cosgig!! He has been my best friend and car afficianato for our whole lives and wouldn't trade that for the world. Have a great birthday and hope the weather holds out for that bike ride!! Love you!

I know its no A body but the color is close!! :) I am parting out this van if anybody needs any parts. Its got a sure grip 9 1/4 rear end, disc brake fronts, blue interior,small block 727, a full set of white 15x7 4 1/2 bolt pattern wagon wheels with center caps some nice replacement parts...

I have a good set of hood callouts for a 68-69 Dart hood. These have the 340 callouts in them but I think you could put any others in there. All mounting studs are intact. These would need to be restored for a nice car or used as is for a decent driver car. The lenses are stress cracked. $200...

I have a 1995 date cast 318 Magnum block with caps. I'm not sure what the status is with this block but it looks like it was hot tanked and prepped for assembly with new freeze plugs and cam bearings. The bore size is 3.915 which I believe is stock for a 318, so maybe this was a virgin block...

I have 3 pieces for a 67-69 Dart. 1st is a good decklid, all the lip area is nice but has a smallish dent in the rear area. I sanded off the area with no paint years ago and it has been stored inside for years. $75. 2nd is a 69 Dart right fender which is pretty nice with only some surface rust...

I have a 4 speed frame bracket removed from a 67 Dart and a trans cross member from the same car. Both are in good shape and will need cleaned for use. The frame bracket still has a small piece of frame attatched that will need to be removed. $15 each plus shipping from Pinckney, Michigan. PM me...

I have for sale 2 rear arm rest pads, 1 black and 1 white. Both have no cracks but are hard to the touch.$10 for the pair plus shipping. I also have a drivers side racing mirror head with no base (sorry) The chrome is in pretty good driver shape. $25 plus shipping from Pinckney, Michigan. PM me...

I have 5 blue arm rests bases for the front of 67-76 Darts and possibly others?? The coloring is faded in some areas of all of them, and 1 is a different shade, 1 has a slight crack, and all have the normal wear, and no broken pins on any of them There is 2 pairs and 1 odd side. I was thinking...

I have a nice set of blue used RJS 5 point racing seatbelts for sale. The certification is out of date but can be re-certified or used in a street car. $30 plus shipping from Pinckney, Michigan. No paypal so money orders are preferred. PM me here. Thanks .Greg

I have a nice used set of Superstock 3400# leaf springs for sale. They are the weight for E-bodies but will bolt right into any A-body. $150 plus any shipping from Pinckney, Michigan. They can be picked up in person as well. No paypal so money orders preferred. PM me here. Thanks. Greg

I have for sale a small block timing cover with a 70 date code, blasted and ready for use.$50 plus shipping. Also a manual steering gear box removed from a 66 Plymouth and has a 66 date code on it. The gear box is cleaned for the most part and is in good condition. $75 plus shipping. Both items...

Im looking for a set, possibly 2 sets of rear 10 x 2 1/2 backing plates that will fit an 8 3/4 rear end. I could use a set for my plow truck project that arent gold plated!! :) PM me here with a price and im in Michigan 48169 for shipping. Thanks. Greg

I have a 1 piece 5/16 tank to front fuel line that I took off my 69 Dart to go with a bigger 3/8 line. Its in great shape as I bought it new years ago and installed it on my car. $20 pickup here at my house in Pinckney, Michigan. Of course if you want it shipped it will have to be bent in half...

Hello all, I am looking for a ralley dash bezel for a 70/71 dart/demon (preferably) or 67-69 cuda that has the radio area cut out and no a/c. I have decided to add this style dash to my 69 dart and with "cosgig" scoring a complete dash setup for me its time. I have an aftermarket radio so that...

I am selling 1 15x8 5"bs Weld Draglite. I bought it to mock it up on my car for clearance and thats what the guy I bought it from did with it also, so it has never had a tire on it or used and was new when he bought it. It is a 4 1/2 + 4 3/4 big bolt pattern and im asking $100 (what I paid) for...

I am selling 2 15x7- 4"bs wheels that I had on the rear of my 69 dart. I bought these new and only used them at the track. They are in excellent shape, I just needed a little more back space. They are the Summit version of the Weld pro stars or the Centerline telstars. They are big bolt and take...

I have a really nice set of rear ash tray arm rests and bases black in color. They were removed from a 73 Dart Swinger body style. Im not sure what other years and models these fit but if you need them I would guess you know. They have no cracks, breaks, or splits in either the bases or rests...

I have a set of 4 speed pedals as removed from a 73 Duster 340 car. They are in good shape, have the larger 6" pin spread with the spring support cover, and include the rod going out to the Z bar (not pictured),the firewall boot (torn) and outside firewall plate & gasket for power brakes, as...

For sale is a 727 small block starter shield with the inspection plate and 3 screws. Its in good condition but needs cleaned up. Located in Michigan and $25 plus shipping. PM me here. Thanks. Greg

I have a new with cap distributor for the /6 motor. I had it for my car but no longer need it. Its located in Michigan and I am asking $75 plus shipping. PM me here. Thanks. Greg

A friend is selling his 67 Dart post car. It has a 340 4 bbl w/headers, 727 trans and a Dana 60 rear end with brand new 3.73 gears and sure grip with a 3" inboard kit. 4 wheel disc brakes. The car is really solid and the floor pan has been changed but very well done. He has some new and used...

I have for sale 1 small block 727 transmission(right in pic) #3515843 out of a lower milage 72 duster 340 car. I dont know the overall condition but I would expect to rebuild it. Included is the convertor, flex plate, both trans to block mount brackets, neutral safety switch wiring and the...