Search results for query: *

  1. 66Dvert

    Slant six exhaust manifold choke bucket

    umm some do, this one is cut up for duals but it uses a bucket or choke well.
  2. 66Dvert

    what are these called and where can I find them

    outers are sill plates for the early Gen cars the inners are carpet hold down trim or inner scuff plate molding. I could care less what others call them since they aren't correct for the early applications later applications incorporated the inner hold down and the outer sill plate into one...
  3. 66Dvert

    what are these called and where can I find them

    they aren't sill plates for sure , they are called carpet hold down molding or trim. They hide the wires and hold the carpeting in place. While these are called Sill plates, Scuff plate or threshold plates. I make replacement sill plates (custom or the boring stock shaped ones) and may be...
  4. 66Dvert

    64-66 Dart GT Question - cat whiskers

    I had a customer make a longer outer sweep for his 66 dart from a 70 challenger set. then he complained that it was scratching his SS divider post (I told him it would eventually rub scratches in it if he used it a lot.) I had to take the longer one off and replace it with the original one I was...
  5. 66Dvert

    instrument cluster restore

    I use it to strip anodizing off of aluminum trim, dash bezels and pretty much any chrome plates plastics. 30 years and haven't cooked a part yet, :thumbsup:
  6. 66Dvert

    Anybody receive seat covers from Legendary or Classic Industries lately?

    I work at a trim shop doing custom leather interiors for slab sided lincolns (nope not a sewer) it takes a special kind of seamstress /seamster to do a good job on the seats. #1- you have to be semi familiar with the seats setup. #2- sew a straight line for over 9 inches guide free and fast (90%...
  7. 66Dvert

    Anybody receive seat covers from Legendary or Classic Industries lately?

    Hold back on your carpet and just order from ACC. they are pretty much the only player left that makes a "close to almost fitting carpet set. (specially for Loop style carpet. on earlier A's) same with the floor mats, if you want carpeted with logo's. it's where legendary gets the floor mats...
  8. 66Dvert

    Anybody receive seat covers from Legendary or Classic Industries lately?

    2 years waiting for my 70 challenger, then I got a part time job at a trim shop and made mine for the wife's 66 dart. (8 weeks total for this rookie to sew then up)
  9. 66Dvert

    Time to play "Which Color Windlace is it?"

    IF you are looking for a direct match for 60 year old windlace , unless you get it from SMS and make your own it just WON'T happen. they don't make the colors to match anymore. it's all about what you can find that's closest. I work in a leather custom trim shop and have to hand make windlace...
  10. 66Dvert

    [FOR SALE] Early A body outer custom lettering engraved sill plates 63-66 Dart,Valiants & 64-66 Barracudas

    I did mention custom engraving didn't I? This is the latest one and it looks AWESOME since it totally different than just Dodge,Valiant or Barracuda.
  11. 66Dvert

    [FOR SALE] Early A body outer custom lettering engraved sill plates 63-66 Dart,Valiants & 64-66 Barracudas

    Just did a custom set for a customer. they came out great. I'll ask him if I can post pictures.
  12. 66Dvert

    [FOR SALE] Early A body outer custom lettering engraved sill plates 63-66 Dart,Valiants & 64-66 Barracudas

    $99.00 plus shipping and handling usually done in a week (just a few bucks more than original skinny lined ones, and yeah I can do those too) Got a few sets working right now but I can custom bend form and engrave outer scuff/sill plates for the early A's 63-66 Darts. Valiants and 64-66 (long...
  13. 66Dvert

    turn signals

    just get a electronic turn signal flasher . one that doesn't require a "load " on it to work.
  14. 66Dvert

    65 Dart Wagon Conversion to a Sedan Delivery

    Good Deal getting it together and working. just be thankful you don't have the rear quarter windows to do. they are Bassackwards mounting and a total pain in the behind to align, Now I know why early A's didn't get power windows (but I still am doing it on the other convertible anyways:D) and...
  15. 66Dvert

    66 Dart Convertible Shoulder Belt options?

    1996 sebring seats (front and back in my convertible) using the corvair kid wiring diagram so they DO work like they should. and they ARE comfortable compared to stock seat plus the power adjustable seats as great for my old bones.
  16. 66Dvert

    Chrome Dodge Script on deck lid of 66 Dodge Dart GT

    none of my GT's have the script, but my non GT does I think it's a trim level thing
  17. 66Dvert

    installation of convert top 63 dart

    yes that's where it crosses over. sometime you have to do a bit more to get a clean transition and look when the top is up. each top and car are a bit different in measurements.
  18. 66Dvert

    installation of convert top 63 dart

    mine was uncut in this section and I had to make that cut upwards to the quarter panel (green line) mine was long and I had to trim it to fit like that picture (and a tiny bit more after I stretched the top and sail panels into place .)
  19. 66Dvert

    installation of convert top 63 dart

    as you can see in the red and cream colored car there are 2 styles of cut transitions AND some are sewn in the split area to actually transition over the lip and others are just cut(90% of them), pull the side panel down and make sure you to NOT cut past the pull down area and tack strip(you...
  20. 66Dvert

    installation of convert top 63 dart

    different top makers do it a few different ways but that flap you see in the red car witht he white top goes inside to the well liner that way water infiltration will be drained onto the well and onto the ground from the drain ubes It help when teh top is being folded down too since the most...
  21. 66Dvert

    64 only Latch cover attempt #1 and some questions

    I may CHEAT big time and make them a tiny bit bigger and then Glue/ add in some 0.030 internal sidewall stiffeners I just can't stand it being that thin. I'd at least like to make my part a bit better than originals even if they are not as crisp I want them to last.
  22. 66Dvert

    64 only Latch cover attempt #1 and some questions

    Not as crisp as I'd like and a little too thin on the sides but Closer and closer do I creep!:elmer:Now I have to learn how to cut straight ,,,hmmm that's going to be harder then making the darned part!
  23. 66Dvert

    1965 Valiant Custom 200 - Creating the Header Seal Retainer

    Super nice job. I'd like to test out /use your 2 part idea. for one of my test mules that I use for parts.
  24. 66Dvert

    1965 Valiant Custom 200 - Creating the Header Seal Retainer

    the start looks good, but it is a difficult part to make and don't forget the "wings" that fit on the sides.
  25. 66Dvert

    A Body glove box - newly made

    thanks for the explanation.
  26. 66Dvert

    A Body glove box - newly made

    I looked at it, Looks great. May take forever to print though. AND it looks to be mounted from the inside with those edge supports on there. instead of the 64-6 outside setup that I have seen on all my 64,5 and 6's. (haven't owned a 63 since forever so I can't remember if they went inside...
  27. 66Dvert

    Wiper Blades

    thanks I went for the heavier types for my RV 19.48 per 2 strips but much better than 60 (I have 2 walmart 28" I can strip for my 13" dart one still got me a BOGO last year at Napa)
  28. 66Dvert

    Wiper Blades

    We're the strips on Amazon and do you have a link. My RV needs some new rubber and 50 to 60 bucks per blade is ridiculous
  29. 66Dvert

    Wiper Blades

    I buy the heavy duty 28" blades and pull the rubber from one of those. take the old stainless out of the old blade and insert the new rubber into it, then reinstall onto the arm. 1/3rd the price of classic industries and you can get them local, I've been doing that since they quit making the...
Back
Top