Search results for query: *

In 1969 Plymouth installed the 440 Magnum engine in 303 fast back Barracudas, this is one of those 303 vehicles. A Plymouth dealer in Vancouver, British Columbia (Johnston Motors) ordered six of these cars (in sequence) and only one of the six was Sunfire Yellow (Y2), this car. All of these cars...

The fuel gauge in my 1969 Barracuda just quite working. After doing the diagnostic it turns out to be the gauge itself not the sending unit nor the ground. Does anyone have an OEM or NOS fuel gauge for a 1969 Barracuda? I think its the same gauge for a 1967 through 1969 (correct me if I'm wrong...

The fuel gauge in my 1969 Barracuda just quite working. After doing the diagnostic it turns out to be the gauge itself not the sending unit nor the ground. Does anyone have an OEM or NOS fuel gauge for a 1969 Barracuda? I think its the same gauge for a 1967 through 1969 (correct me if I'm wrong...

I have a 1969 Barracuda with 45,000 original miles on it. It has some halogen headlights on it and I purchased some General Electric 6014 bulbs to make the car more original looking. When I replaced the halogen bulbs with the OEM 6014 bulbs and turned them on they started to smoke inside the...

This Carter 4640 carburetor is for a 1969 Dodge/Plymouth vehicle with an automatic transmission and a 440 CID engine with air conditioning (AC). It has just recently come off a running vehicle so it probably will NOT need to be rebuilt. For you numbers people, the carburetor is date coded G9...

I'm looking for an alternator that is stamped with 2098850 and has a 1968 date code. It should have a single groove pulley for my needs. Send me a message if you have one for sale. Thanks for looking. Dennis

I'm looking for a Carter 4618 carburetor. It has to be in good enough shape to be rebuilt; its for a restoration project so the date code has to be L8 (November 1968). If you have one for sale please send me a private message and we'll talk about price. Thanks,

I'm looking for a Carter AVS 4618 carburetor. It has to be in good enough shape to be rebuilt and its for a restoration project so the date code has to be L8 (December 1968). If you have one for sale please send me a private message and we'll talk about price. Thanks, Dennis

I'm looking for a Carter AVS 4618 carburetor. It has to be in good enough shape to be rebuilt and its for a restoration project so the date code has to be L8 (December 1968). If you have one for sale please send me a private message and we'll talk about price. Thanks, Dennis

I'm considering restoring my stock steel wheels and need some advice. Can these wheels be powder coated and should I do that or just paint them? If I get them powder coated can I get the stock Y2 (Sunfire Yellow) color? Should the back of the wheels be painted (powder coated) Y2 or just black...

I have a distributor with the following number cast on the side of it: 2875346 What is this distributor originally from (year, make, model)? The 2875346 is followed by 3 17 does this series of numbers refer to a build date? Thanks for the information, Dennis

I'm looking to restore the rear trunk panel on my 1969 Barracuda and need some visual information. Can anyone provide me with a close up detailed photo of this panel? I'm particularly interested in the color of the horizontal top and bottom strips on the panel. The car does not have an "S"...

I'm looking for a 4618s Carter AVS carburator for my car, if you have one for sale please send me a private message. Thanks, Dennis

I have an oil pan that is stamped "187" for sale. I know that this will work in a big block/A-body combination since that is where it came from (1969). It comes with a windage tray and an oil pickup tube (see photos). I'm asking $100 for everything and you pay the shipping (probably around $55...

I'm looking for the brace that goes from the K-frame to the radiator support on the underside of a 1969 Barracuda. Mine is dented and bent (see photos). If you don't have one do you know of anyone making reproductions? PM me if you can help. Thanks

I have a double groove crankshaft pulley for sale. It is an original Mopar part (not a reproduction) and was taken off a 1969 383 but I think it will work with 64-69 383/440. The pulley is in great shape with no nicks or dents (see photos) and is 6 ½" in diameter and 3" tall. I'm asking $30 for...

I'm looking for a single groove crankshaft pulley. The MOPAR part number is 1821449 and apparently it is 6 ⅝" in diameter and 2 ¼" tall used on big blocks from 1965 to the mid 1970's. Please check your parts bin and send me a private message if you have one for sale. Thanks for your help...

Mecum Auction in Seattle this weekend. MECUM SOLD $3.5 Million - 1971 Plymouth Hemi Cuda Convertible - YouTube

Does anyone know what sort of bolts and nuts were used to fasten a fan shroud to a radiator on a 1969 Barracuda? Photos would help if you have them. Thanks, Dennis

The part number on it is 3869837 - according to the Internet this shroud is from a 1977-79 Aspen/Volare with a slant 6 and A/C. It is 21" tall and 22¾" wide with a 20" diameter hole for the fan. It has a crack in one of the bolt holes (see photo) but it will probably fit other models. I'm asking...

I'm looking for a 0.70" fan spacer for my car. The number cast on the back of the part is 1851960. If I am correct this spacer was used on 1966-69 big block Mopars. I hope someone has this in their parts bin. Let me know if you can help me out. Will pay for part plus shipping.

Looking for a 22" fan shroud. Mopar part 2785614. I know that these are reproduced but, i'm looking for an original. Should be in very good condition, no cracks or defects, etc. PM me if you have one for sale. Dennis

Does anyone have a photo of the correct oil pump pickup for an 893 oil pan? Thanks, Dennis

I have a complete kick down linkage for a big block (383/440). Don't know exactly what year it is from but I would guess 68-71. I can email you more specific photos if you need clarification. I'm in Calgary, Alberta (Canada) but I will ship the linkage to the US (USPS). Would like $65.00 and you...

I need a kick down linkage rod from the carburetor to the bracket at the back of the motor. It is about a foot long with one end threaded and a slotted link for carb. It should have a small ear welded on it half way along for a spring attachment. Can you check and see if you have this part...

Does any member here, have photos of the correct kick down throttle rod for an A body big block (H or M code stock)? I think that the rod is supposed to have a small ear on the side that the kick down spring loops on. Dennis

Looking for a good big block oil pan stamped with 893 with strainer.

I know these are RARE but if I don't ask, I will never find them. I am looking for 1969 440 exhaust manifolds casting #3462017 (drivers side) and casting #2863900 (passenger side). These need to have casting dates before Dec. 1, 1968. Will pay $3500 for the pair, thanks for checking your parts...

I have a pristine 2949066 radiator that I just removed from my BB car for sale. This radiator is for a 1969 A body with a 340 auto/stick and needs nothing. The radiator surround is stamped 1177 which corresponds to an April 27, 1967 build date for those looking for numbers. Asking price is...

I have a pristine 2949066 radiator that I just removed from my BB car for sale. This radiator is for a 1969 A body with a 340 auto/stick and needs nothing. The radiator surround is stamped 1177 which corresponds to an April 27, 1967 build date for those looking for numbers. Asking price is...