Search results for query: *

Yes, it's the GM caddy brake system they sell. I also got the 35 spline axles cheap on eBay. They were originally ordered from strange to fit a stock width duster. Came w green bearings. I got lucky

I've got a HD Dana from a chevy 1 ton in my 472 hemi '69 fastback barracuda. I cut and narrowed it myself, kept the truck gears, and put a spool in it. I've got less than 800 bucks in it. Plus, the extra weight of the HD doesn't hurt the a-body, and I know I'll never hurt it. Oops...

Thanks for the fast reply.

Brand-new trans, converter as full as I could fill it before install. How many quarts to put in before I fire the motor?

The pinion on an 8.75 is offset to the pass side, and the axles and tubes are equal length. When I cut down my Dana 60, I had to make the pass side shorter, and I used a spool so the pass side axle could just push through the spool splines further than the driver's side. It gave me enough...

same mout, shorter driveshaft, no cutting necessary, but you'll have to plug the holes the clutch/shifter linkage went through.

Actually, heat in the center section is not automatically a bad thing. When I put a Dana 60 in this past July, I checked it after a run, found it hot and ran to my guy who set up the gears. This is a shop that does A LOT of commercial work. He told me that 100+F is normal. Change the fluid, put...

Thanks fishy, especially about the cheap sprag.

Well after 3 months of leaving it in "D" and mashing the throttle, lighting up the hides, the 727 started to slip. Dropped the pan, and all kinds of metal/gook/stuff in the pan and filter. Guess this one's done for. I got 3 more units I can build while leaving this one in the car. I'd like to do...