Search results for query: *

^^^^^^ I would agree, has to be set perfect for igniting at TDC, just like the cars of today do. Fire the compressed cylinder to start at a red light when foot comes off the brake. Don't gas golf carts work on the same principle???

Its a 69 as I have the replacement lens 2930494 which fit perfect. I now have to match my new 2930495 lens with a housing. I'm 95% sure I've narrowed down that I had two rights (passenger) installed on my car. So I'm on the hunt for a drivers side housing. Thanks

Ok I have two 2930494 lens. But I can't find a site that identifies that as the left or right side.

Hey guys, I need a quick confirmation. I bought replacement lenses for my parking lamps. While replacing them, one is not fitting. Upon closer look I now believe the lamps are identical and I'm afraid I have two rights or two lefts. Are there distinct sides? How do I determine what side I...

Can someone smarter than me, when it comes to distributors, give me advice? (That's a lot of you) I need a new distributor. I'm running the original points distributor on a slightly pepped up street 318. From what I have read in forums I should stick with a points distributor. And I've read...

Update; The plug end at the sensor was a little loose. However, I decided to change the sensor based on "Redfish" response being the problem was heat sensitive. Plus, all other dash gauges are working well leaving me to believe I have good connections in the dash. Problem fixed; The plug...

Thanks for the feedback. I’ll do some checking and testing.

Hi Guys, My temp gauge does not always work. Sometimes it will stop working while driving and then start working again. The other gauges in the cluster are working fine. What should I be considering first; the gauge itself that's the problem, a ground wire or the circuit board? Is there a...

Where to start??? Try shifting it to neutral and turn the key.

Excellent thread feedback. Thanks to all.

Hello guys. My question is to learn the purpose of what I did. This is the engine; 318ci, bored .020 over, stock pistons, 302 heads decked to 58cc (ported), Edelbrock Performer intake (ported), Edelbrock 1406 600cfm Carb, Comp cam XE262H Duration 262/270, Lift .462/.470, stock distributor It...

If you hadn't changed any wiring when doing the replacement then I would go to the battery. Clean the terminals and ensure its a good battery before messing with any wires. I had similar problems with mine, thought it was ground, then the switch, blah blah blah. It turned out the battery...

Ok, thanks for the info guys. Greg

Original tach in my 69 Barracuda. I'm driving along at 2700 rpm for 30 minutes or so with the odd stop sign along the way. I leave one stop sign and my tach starts reading about 1000 more rpm at the same speed I was going previously. It then corrects itself about 20 minutes later. It...

Changed out and everything is fine. Thanks again.

I forgot to mention I had changed out the dimmer switch already. i have a new headlamp switch and that is what I will start with . Thanks for your help.

My headlights will shut off while driving after about 15 minutes or so then they will turn on and off as if I am flashing oncoming drivers. The parking lamps are not affected. And to add to the situation it only happens while driving??? They won't cut out if I just turn the lights on while it...