Search results for query: *

Does anyone have a chart or PDF for a Mallory Vacuum Advance Canister?

Dual plane manifold? What's the redish tinge or is that the lighting.

Agreed.

Agreed but that may not fix the issue of break up. You need to see what the curve is doing after that point.

The timing may not be right but the curve is good. What's the actual specs of your build?

What advance mechanism does that distributer use? Pics?

That's pretty good what distributer do you have? Also have you run to 6K to see where it is there?

The Crane is a very good unit. I saw a distinct difference in idle quality when I swapped the MSD 6AL out for the Crane. I've seen a drop of .5 volts on my car make a difference in idle quality and even cause it to misfire as a result. It all started when I changed the pulley size to stop the...

They work but not optimally. From what I've read and understand from guys that have spent a lot of time tuning race engines different ignition types prefer different fueling ie richer vs leaner and when you improve the mixture quality. CDI being the better of the 2 when chasing power.

I'm also running a crane HI-6 and PS-92 coil which I was told require 14+ to work correctly. I've seen a slight drop in voltage change the combustion at idle to where it fouled plugs and wouldn't seal the rings properly if it dropped too low on the rpm's. 14.4 is ideal! The Denso has a voltage...

Have you measured the voltage at idle?

I swapped out an MSD 6AL and MSD Blaster coil for a Crane Hi-6 and PS92 coil and the difference was very noticeable.