Search results for query: *

I think to disconnect the battery is good cheap insurance. This helps to extend the life of the battery and any malfunctioning while parked for a long time. Here’s the battery disconnect switch I’m using; Moroso 74101 Battery Disconnect Switch 84663741012 | eBay

The brown and blue wire? Yes, those are tied together as well. Problem solved! Got a NOS Mopar Switch, changed it, everything went back to normal. :D Say NO to crappy quality china repro parts :banghead:

The thing is I replaced the ECU and ballast for a MSD 6A unit.

Hi there! I recently rebuilt the steering column for my 1974 Dart and replaced both the ignition and turn signal switches. The ignition lock was replaced as well. From a cold start the engine starts right away with no issues. When I turn off the engine and try to start it again, it shuts down...

This relay kit is such a great upgrade for any A body that I would recommend it to anyone. Just got them installed in my Duster and the difference while night driving is huge. :D I didn't had to cut any wire and the instalation was completed in about an hour. Thank you Momoparman for the link!!

Did you checked the fuse?

There was not a good ground on the ECU. Cleaned firewall ground contact points and added a ground wire direct to the battery. Problem solved; 318 came to life right away. THANKS!

I know for sure that the bolts that hold the ECU down are a good ground source, will have to check maybe adding a ground strap from the negative post of the battery to the ECU itself. Is there any way I can test the ECU rather than just trying with a new one?

Hi there! I've just about to finish my SB swap in my Duster and today I got to the point where the first start is due. The engine cranked fine but didn't start after a few attempts. After checking the ignition system I noticed there was no spark; further inspection revealed there is power on...

Just for the record: problem solved! The one to blame was the turn signal switch... Thanks for the help¨!

Had this issue before, had a bad ground at the parking light socket. It was rusty inside. Solution: replace the socket About my initial issue, I'm waiting for the switch to arrive to swap it and see what happens

Yes they do. Just checked. Both signal indicators ilumminate in the dash as well, only when using flashers

Hi there, Seems my left turn signal is not working in my duster, just the front one. Flashers are working OK, rear turn signal OK and both right side turn signals OK. When I put the left turn signal the indicator won't illuminate in the dashboard, just the rear lamp flashes. The bulb is not...

Had the same problem with my Duster. The main issue was the gauge itself. Changed it and done with that!

How do I bypass the factory ammeter?

Killer switch hooked to the positive wire, console mounted. Never had any problems with that.

Had the same problem on my /6 Duster. Used the jumper wire technique but the car could start in gear. For safety issues I just changed the neutral switch and problem solved !

Weird thing is that even though I installed another switch, externally, the issue continues. Could be that the function is not the same if installed outside the position it is supposed to be. Gotta check that. Thanks Anw

It is not a rod. It is a sort of cam with a small rod attached to it that the lock switch moves when you turn the key.

I took the steering column out of the duster to add a steering coupler kit and the dash in order to put one that was in better shape. The thing is that when I tried to fire up the car, after I put the steering column back, the car dies as soon as I take my hands of the key. In order to keep it...

Just got rebuilt my 2 speed wiper motor and have it installed back in the car. The thing now is that when I turn on the wipers they make only one turn, after that they dont work anymore. After this happens, there is a clicking sound that comes out of the wiper switch that moves the alternator...

Just got rebuilt my 2 speed wiper motor and have it installed back in the car. The thing now is that when I turn on the wipers they make only one turn, after that they dont work anymore. After this happens, there is a clicking sound that comes out of the wiper switch that moves the alternator...