Search results for query: *

anyone have a source besides YearOne for a voltage Regulator with the RED stamped letters ? need one for a 68 thanks

Hey 63, I have this volt reg, like new for $20.00. let me know :burnout:

Great. found one. thanks

Who sells the best turn signal switch ? thanks :burnout:

Think I got it !

ok great, thanks !!!

Simple process of elimination, get a test light, turn on key, see if you have power at ballast rist. should have done this first. If power is there, follow the power to coil, then to dist, if no power at BR, you have to go under dash to key switch.

Helping a friend w/67, (fire under dash) replaced harness under dash, need to know: at AC control module, you have a 3 prong blower, then another 3 prongs centrally located on back of unit, (Harness has them seperate, not as one plug) then one prong on top and one on lower portion. Which wires...

sounds like the converter

thanks but I have the dash back together, by biggest concern was the large black wire and probably goes to the left of the large red, the cluster reads "red" on one terminal, I assume the Alt gauge, not sure if the black goes on the one beside it, or the next one over. looking at it from the...

thanks got those, however, they are not detailed enough to tell exactly where / on what terminals the wires go. QUOTE=momoparman;1969764976]try this http://www.mymopar.com/downloads/1968/68BarracudaA.jpg http://www.mymopar.com/downloads/1968/68BarracudaB.jpg

Does anyone have or know where I can see a diagram/layout of where/color wires go, on the back side of a dash gauge cluster on a 68 cuda ? thanks

Hello Ken, you run + to + and -to -, this give you still 12 volts, but 2x the cranking amps, use typical battery wire, same size/gauge from your starter, ground, etc. 6 or 8

Definitely, even a 74, 84, 94, 2004 !