Search results for query: *

switch was dead anyways.Return cancel tabs are broken/gone.

Does the import have separate bulbs for signal and stop? Does the trailer have one bulb for both? If so the systems are different and you buy an adapter to make them compatible.

Parking brake light ??

Pics of lights and bulbs please.

Good job!

Light em up !!!

3 prong = ground in , reverse, and ground out for neutral switch. you will need to do simple wiring mods. get wiring diagrams and compare. It will become clear.

That's what I would try first also. Ground issue, dim side.

Any chance it has a number of cylinders setting? 4-6-8 switch under back cover?

With which ECU did it start on? Now swap in the others and see if they really test dead, since this thread is about ECU 's failures and a suppler is named. Thanks

That will fire the engine up ,but likely not give you any accessory circut power for wipers, radio,turn signals etc. ignition switch comes out easily and simple to figger out which wires need to be jumpered.Unplug switch and find hot power slot. 1 jumper for ignition, 1 to acc. and 1 for...

I think that thing might be the seat belt buzzer. Often disconnected.

Thanks /6dan I had faith you would know about it.

Agree from factory they don't flash,but I did read an article about how to make them do it years ago. Didn't stay on constant and have a high (brighter) flash. What it did was stay on (park) then went out as signal flashed. Our lighting expert, /6dan , may have to chime in if he knows of the...

Yes sort of. Any 361/383 distributor will bolt in. 413/426/440 will work with an adapter spacer. Anyone got one to show a picture? Worth a 1000 words.

I've seen LED replacement bulbs for 1157's ,but not complete LED lens assemblies.

Simple toggle switch may not do all you need it to do. Your dealing with 2 or 3 speeds and the pack away circuit.

For your rear battery I would connect neg(-) to the block and lighter guage from block to body usually to rad support area. For pos(+) I would connect to starter lg terminal and run lighter guage (not to small) from lg terminal to the starter relay. Wire from (+) starter to relay should be...

Mullinax95 who make those clusters and what color do they glow at night?