Search results for query: *

Thanks Let me look around this weekend to see if i can find mine. I will let u know. Chris

You are the man! The question is ! Where is mine, i never threw any of the parts away. Can i buy that one? What is it called? Thanks Chris

Those parts were all on there before. I just painted the silver metal piece. I did switch columns. I switched from automatic on the column to console shift manual column. But i dont think that should matter.

Hi, Im trying to put the car back together after a complete disassembly. I started to try and put the steering column in but i cant find or figure out how the front of the steering column bracket mounts. I think i am missing a bracket or something. I took lots of pictures and packaged everything...

Any luck yet ?

I dont know about the repros, but firm feel has the 20:1 gears made for them so it makes the box a little pricey.

I am about to send my stock manual box (69 Dart) to Firm Feel for a 20:1 makeover. I did some research and the 20:1 was a good compromise for me.

and what to do with my steering box................. I will probably send it to Firm Feel. I'm leaning towards the 20-1 instead of my current 24-1 Any input ???

I'm in the process of rebuilding my front end. I have qa1 upper control arms, KYB gas shocks, q1a lower control arms. Stock 73 K member hellwig sway bar manual steering 340 engine with 727 auto Kmember is from a 73 dart, I am going to run 11.75 discs and the late 70s single piston caliper. I...

Good info..... Do you guys know what the stock ratio is on the manual steering Box for a 69 Dart. I am going to have mine rebuilt and I see that firmfeel offers a 24:1, 20:1, and 16:1. Has anyone changed the ratio ? How did you like it?

I just installed some on my 69 dart. The left and right are different. I just have mine tack welded in place right now. Its not easy to weld thicker new to older thin metals. Nor is it easy to weld out of position with little room. I have a Miller 140 auto set mig welder with gas attached. I am...

I looked on summit after I posted , and they have them there. The frame is supported a little farther up in the photo, so all the weight is not on the axle and springs. I will add another jack into the mix under the leaf spring, thanks for the tip. Thanks for all the help guys ! Where would I be...

Hi Im trying to remove my leaf springs and then the axle so I can get it powdercoated. The ubolts are sort of rusty , I shot some lube on there to soften em up but it doesnt seem to be working. Are the nuts that I am trying to take off supposed to be difficult to remove, like oval or something...

I am adding cartool subframe connectors to a 69 dart. The car currently has no engine , trans or driveshaft. The instructions say you can have a few notches in the connectors to route the brake and fuel line thru. I did the passenger fuel side but am having trouble with the brake side. The brake...

In looking at the QA1 website, I see the K member and upper and lower control arms for sale. What did you get the "whole" package or just some of the pieces ?

I have a 73 duster k member in my 69. I am in the early stages of my build, I am considering replacing it with the QA1 tubular k member. Theres a thread about it somewhere on here.

I was planning on doing frame connectors after I got the motor installed

Is the b body crossmember the same size at the tunnel as the a body ? Gonna check a few yards today. If I could use the center section of the b body crossmember it would expand my possibility of donor cars.

if I had a donor piece it would need to be all the way to the where the torsion bars mount....anyone got one of those layin around ?

I also thought about getting a piece from a donor car, but it would probably take just as much time to fabricate some sort of brace that followed the contour of the trans tunnel. The rest of the crossmember is in good shape. If i ground the area smooth thats all jagged and filled that in and...

The last owner of this 69 dart let the car in the water with Jaws. The result was half of the width of the torsion bar crossmember was eaten away on the drivers side. No....the last guy that owned the car said he got it this way. I think they may have been trying to stick a manual trans of some...