Search results for query: *

Firefighter1, try www.brakeco.com website or call them at 1-877-525-5233. They will be able to help you. I bought my booster from them in 2007 and I am pleased. At that time I paid 149.95 plus 100.00 core charge. Core charge was refunded. They are still in business, they were located in Rancho...

Check www.aerospacecomponents.com I have had their drilled and slotted rotors on my car for about 3 years. They are turnable and I have had zero problems with cracks, warping. I have their complete system and like the saying goes, "You get what you pay for." Alot of folks like to spread...

Advice is good and I need alot. This time it is about the power brake vacuum hose connection. The new street avenger carb., 770, has a connection for the power brake hose but I have used the manifold vacuum port at the rear of the intake, M1, below the carb. Is one better than the other or does...

I just hung up the phone with Scott at Aerospace. He told me that the bolt pattern will not effect the price. However, the $635 price is for drag brakes and that price is not for Mopar. Mopar is 750 for drag brakes. They do need to have the spindle to mock up the kit to your stuff. It is now...

Yes, that was a complete kit. They want to have your spindle to custom match all parts. If you contact them directly at 727-347-9915 and tell them what you want they will work with you. If you call after 4 PM and ask for Scott, he works evenings, he will be more than helpful. He came out to my...

It is basically the same as bench bleeding. Run a tube from the line connection fittings back into the master cylinder. Then press pedal down smoothly and release, repeat this until there are no air bubbles coming from the tubes. Do not pump the pedal just press down smoothly and release. Oh...

I used Aerospace Components kit and went to the 5x4.5 bolt pattern with Moser axles. Four piston all aluminum calipers with drilled and slotted rotors.http://www.aerospacecomponents.com

I did a swap to four wheel disc on my 1967 Barracuda. I switched to the large bolt pattern and I used Aerospace Engineering kit. I have power brakes but I had to change the master cylinder because I also used four piston calipers all around and they need a larger diameter master cylinder. I...