Search results for query: *

Based on the examples I've seen the orientation of that link is correct (round side facing down). I ended up using a Dremel tool to grind a bit of metal off on the linkage where the arm was hitting and now it clears and the wipers operate fine. Seems odd that the linkage is all correct and I...

The drive link is correct #2889966 I am at a loss now. Every piece of linkage appears to be correct.. only thing I can think of now is that something could be bent.

Yep it is a 2 speed. Part # is hard to read but it looks like it's correct for 71 (2822252)

i was thinking that as well but from all the pictures I have seen have it the same way (The round side facing down).

I will disconnect the motor crank arm later today and report the #. Based on my research it should be #2889966

Also both wipers go to park position and look good. Issue seems to be the passenger wiper is moving too far up. I'm just confused because the linkage part no. all seem correct. Linkage is all connected in above pic in park position. Above is at the top of movement where the arm hits the...

I replaced the plastic bushing thing that hold it together. It just pops out of it when the arm hits the linkage.

Hi All, I wasn't sure if this was an interior or exterior technical question so I chose the latter. When I run my wipers (2 speed) the linkage connecting to the passenger (right) side pivot pops off when the wiper position is at its highest point. See the picture below. It definitely seems...

Ok I've recently had my car painted(by a friend) and the guys removed the chrome trim around the windows to paint it. For reasons I'm not going to get into here I had to remove my car from his shop before they could reinstall the trim. So anyway I was wondering if anyone could give me a little...