Search results for query: *

Can’t remember the size but I got these rubber grommets at the local hardware store and called it good.

Good to know. Thanks. Definitely not cracked. Double checked it, just rtv or something on it.

Not sure if this will work. Off a 360 Not sure if this will work. Off a 360

Dumb question but are you wanting a set or a single assembly?

If I recall on my 340 you use the threaded nipple ( where the filter spins on now) off the 90 adapter and you have to get a plate and gasket. Junk yard or parts forum for a factory or this is available. Canton Racing Products 22-575: Oil Filter Plate SB-Mopar | JEGS

Trunk tail panel? My 68 clips don’t look anything like yours. Might try these guys R/T Specialties - Mopar Fasteners, Clips & Hardware

Let me know what you have.

Here you go. More than you want to spend but might be money ahead over a 1000-1500 car. Check it out and make an offer if it will work you https://www.ksl.com/auto/listing/3986813?ad_cid=5

Looks like the link wont work I use car-parts.com Car-Part.com--Used Auto Parts Market Might have to try a couple different searches of dodges that came with the 5.9l I used 1991 for the year and a 250 series truck 1981-1993 for the model and several came up

Some junk yard ones around if you need to go that way. You can even buy a warranty on them from alot of them. Search Results

i might have some too. Ill check tonight and let you know.

About 3 inches deep Like in post #6 on this thread Pulley ID thread

70 and up 6 7/8 diameter Let me know what you have.

just need the triangle shaped bracket for a 70 and up small block. Thanks

pictures

I've got one.I believe this is a stock converter. Stalled at about 2200 rpm with my warmed up 340. Was external balanced but I knocked the weights off. Really not sure what it is worth... thinking $50.00?? or open to offers plus shipping from 84096.

Don't have one to trade but had the same problem and figured out that this is the one needed. Good luck. Speedometer Cable ATP Y-819

Listing just expired, send the seller a message http://www.ebay.com/itm/Mopar-A-body-gts-dart-repo-1968-Grille-Nose-finished-/351604069218?vxp=mtr

Here you go. http://www.forabodiesonly.com/mopar/showthread.php?t=322982

I was trying to upgrade my passenger side also and found these. He said it has some dents in it so I passed but it might work for you. Scroll down through the pictures and you'll see them. http://www.forabodiesonly.com/mopar/showthread.php?t=315400

Looking for the passenger side.

Try these guys. http://www.rtspecialties.net/

PM me and let me know what you have. Thanks.

P.m sent

Looking for chrome knobs for heater controls for my 1968 Dart. Not sure what other years will work. Pm me with what you go. Thanks.

Here is a different one Mopar A Body GTS Dart Repo 1968 Grille Nose Finished | eBay

I saw one on eBay the other day but it was $1500.00 bucks !

Thanks. I did find them new online but was hoping I might save a few bucks going with a used one.

Let me know what you have. Thanks.