Search results for query: *

reduced to $1000

here's a pic of the rotors & calipers. rotors are good to run as is or take a light scuff. the bearings are bagged and tagged. the calipers are cores.

complete 73~76 disc set up with a V8 K-member, including factory swaybar. everything you need to upgrade any 67~76 a-body. pulled out in favor of an aftermarket set up. the upper & lower ball joints are still in good condition and have lots of life left, you can run the upper control arm...

unsolicited opinion: that's a decent deal for a buyer and seller. you might be leaving a small amount on the table but that leaves a little room for shipping to prospective buyers. good looking parts, should move quickly. GLWS

72 and down have fine threads on the K-member side and are shorter 73+ have coarse threads and are longer on the 72 and down the drilled hole for the roll pin is also closer to the K than on the 73+

64~72 disc brake spindles, no brackets, the caliper mounts to the spindle so you'll need those bolts which i think may be specific. then you need hubs and rotors, it's a two piece design. the rotors are avail, but hubs are NLA so you'd need to source some used. here's a vid with some info:

i have a 73 here on the floor and it's 37.5" center to center, the arms are about 9" and don't seem to come out at such a wide angle. i don't know if it's the photo, but it looks too straight. the 73~76 have a pronounced 1-ish inch step up that runs most of the length of the center section.

SOLD SOLD! thanks for the ad FABO and thanks for all the interest!

sorry, sold them locally tonight.

another bump before I put them back in storage. great set of wheels. tires would be okay for a project roller!

bump bump to the top

I also found another pair of SBP 14X6's hiding in the corner of the shed. I'll be listing them up separately in case you (or somebody else) were looking for just the two.

bump. Didn't sell at the fling. open to offers. FYI, did find the other beauty ring. willing to ship and will bust the tires off to make the ride lighter.

Bump didn't sell at the fling. open to offers. willing to ship on buyer's dime.

Set of 14" steelies. 14X4.5 and 14X6JJ These came off of my 69 cuda. I *believe* they are old Stockton Wheel and are stamped made in USA and early 1997 date $160 OBO Located in Los Angeles 91343, will ship. Will also be at Fall Fling.

Very decent/driver set of 14" 5X4.5" Rallye rims. missing one beauty ring, one center cap has a ding. Tires are quite old, but they're 245/60's and 205/70's, ran these on my 64 & 65 darts no problem. $350 Located in Los Angeles 91343. Will be at Fall Fling and can deliver.