Search results for query: *

Check all your new brake line conditions for a leak, could be pulling air in at a few places

Oh, didn't know about the Sterling brand, hope its an easier time getting the bleader out, sending some Hoppy positive vibes on heating and wax deal.

Like what Hoppy said, never heard of that eather, but I would just change out the wheel cylinder. He is a smart fellow that @halifaxhops

If I remember right the aspen and Valarie are the same rotors, another member will jump in and verify..

I did also, completely perfect fit, all 73 mopar disks single piston on my 66 , 645. To my door

thank you for chiming in TJ, Yes,what This man/member said, and I have done it many time with zero problems to this day.

Those rotors are heavy, and you can buy them cheaper at Napa or Orielies, or the zone' Heavy brings up the shipping cost.. There price is higher for the rotors.. then the price we can walk in an auto parts store and buy them, They will sell you the kit cheaper with out rotors, the ram man told...

I have met the Ram man, and he talked me threw everything, parts kit showed up and even after the sale I had no problems, but I did call to check if I could talk to someone if I had any kind of problem, His first site was hacked by someone !! I can't and will not say who and what site did it.. I...

Same kit the ram man sells looks like to me. The Ram man was a bit lower priced, you can by the rotors at any auto parts store so I saved a bunch buying my own and saving on shipping. Did you look at my restoration thread Rainy ?

I will say this one time, and one time only, stop the bashing in this thread NOW !!

I did the Ram man kit, love the instal and parts are everywhere for these 73 to 76 disc brakes, Very happy

73-76 LBP disc setup, bolted right on and any part can be found at any auto parts or salvage yard, very happy.

No problems at all with the Ram Man myself, I like his info and to keep everything mopar, can get all parts from an auto parts store if needed to be replaced, his kit was a bit over 600.00 and everything bolted right up to my 66..

take a quick look at this page on my build, he may have changed his name, his name is Jack I believe 1966 Valiant Sedan V8 Swap (Victoria)

I used this kit on Victoria, I did use castle nuts and drilled a hole for a carter key to be used is all I did different

And I believe I was told the pas side was on wrong, looks like the small brake show was not in the front as I think it should be, a good tec will be here soon and get you going :thumbsup:

HERE IS MY 66 7 1/4 REAR SHOES I TOOK A PICTURE OF BEFORE I REMOVED THEM ,THEY WORKED PERFECT This was about 7 years ago :steering:

All of this great info in here will be used by many Thank you all very much for contributing and what a fine job of covering all bases :thumbsup::thankyou::thankyou:

I have pulled the 7 1/4 rear end and replaced it with an 8 1/4, I have everything I need for brakes (all new) but the E-Brake hardware, my question is will all the hardware for the E-Brake that is on my 7 1/4 work in my 8 1/4 ?

That is what I did and used the tapered bushing :coffee2:

I picked up what I needed from The Ram Man and it is the same as you have there, if you don't want to change out the upper A arm look him up for any parts you need Do a youtube search on Ram Man Mopar brakes and you can learn allot from him. Love mine, any part you need just give him a...

73-up set up for me, I have read and read posts here on these and watched on u-tube the greatness of having all mopar parts under my front end... jmo..

Thank you, That sure shines the light on what I want to do :glasses7:You have dun your/my home work well sir :glasses7:

Can the rotor and caliper be bought most any where or order them refabbed ?

So will 73 up brake parts and disc work with these hemi71x ??

Thats the way we do it now, a big syringe full of brake fluid and push it in and up from the bottom , Works great.

Would brake lines getting hot do this (headers) ?

Thank you treblib :color: glad you jumped in and straightened us out on this :glasses7: I did not know the drum spindles was different or that there was even drums in 1974 #-o

E bodies have a different A arm, I am going to use Ram Mans early A body kit, yours already has the large upper ball joint, let this thread ride today and see how many good tech will jump in and advise you, should be an easy install , so you have drums on your front ? Thats wired .

Hope this helps MOPAR REAR DISC ,8.75",9.75" REAR AXLES - YouTube