Search results for query: *

20240415_183917 by Hyperpack, on Flickr Hello All, in the above picture, I want to know what all of the silver marker means if anything. I know that the 90 1/4" is the Rollout / Circumference of the tire. But what about the 5 HZZ 2? and the 20/10? Any help is appreciated. I just want to...

Those RAS Rocker shafts can be thin/ soft - Don't tighten them too much as they will squash out and bind. I used less torque and some red loctite on the RAS unit I have n my '69 Dart. They have worked fine since ~2006. and ~30,000 Miles.

That is a lot of cut. I dont think I ever milled more than 0.120" off a head.

Maybe it is angle milled? The dime is totally gone! Bye, Bye Roosevelt, Sir. Measure a stockish head from the valve cover sealing surface to the deck and compare it to this one.

I bet it is less than 38cc

What are the cam specs and piston/ compression ratio specs on the new engine? The australian rollmaster timing sets have never let me down although the lower gears are tight on the crank and can be fussy with the degreeing on the crank gear.

Do you use a two step with the transbrake? When I footbraked I never used a 2 step, but I did with the transbrake. In my setup it was not all that differnt in the timeslip between the 2, but I could "tune" my reaction time by futzing with the 2 step RPM. I am not sure how everyone else...

2 outta 3 stooges aint bad. Those other 2 are supposedly "recovering"

Ooh feel the burn. Motor does not make enough heat to burn you at 4100 :)

You're not going to blow it up. At least not yet.:)

What app is it that you use for timing and tracking? Congrats!

That would seem to be a viable alternative to me. Thanks for the explanation Stan! I do not know much about flow testing things. Greg

Looks like the Green Grenade to Me!

what is the problem with the small bore that they cannot do?

He should be there sometime I would say! :) :)

Thanks. I do things my own way sometimes.

Thanks for Sharing. I have a thing for collecting and driving F Bodys instead of racing them. Congratulations on your interview and feature. I have one F Body in each Flavor, all the same color: 20220812_112325 by Hyperpack, on Flickr 20220812_112404 by Hyperpack, on Flickr We enjoy taking the...

Late A bodies = Heavier but more affordable / less desirable .. The best RWD A body for lightness is the 60-62 Valiant / Lancer, then you get into the crickets / Arrow / Challenger Rebadged Mitsu Cars. I have an '87? Sundace for another project sometime. I have cut a Lot of weight out of mine...

Here is some "Ruster" Info: A few Videos: Interview with "Uncle Tony" Build thread: - Over 80 Pages Long - Starts Back in 2009. https://www.slantsix.org/forum/viewtopic.php?f=6&t=36132

Okay. I will post some links and videos when I get back to the confuser.

Lots of Hacking on a garbage car pays dividends.

Ruster is About 2300 With me In it and full Racing gear and gas. Need to check the weights again.

Thanks For Sharing! I took my Disco Wagon A few years ago to the July Mopar Show At SMP - did not do any racing, just show n shine as well as Swap meet.

If its a lemons car.. which it is. Mods are unlimited for Aero.

E58 is the 1978 'Lil Red express spec and used in the police pursuits as well during that era. We have one in a 1980 Dodge aspen at my dad's shop. I don't have all the specs but I am sure they are readily available. Greg

From my experience and also talking with other mopar road racers, most choose not to use a rear sway bar anyway. If you have the front setup properly with good rate and a good sway bar with skookum mounts and geometry you may not need a rear bar at all.

Yes if you are going to stay with the chrysler calipers the ~'77 cordoba 11-3/4" rotors with ebc yellows are good. Upsize the wheel tire combo to ford wheels... mustang 245 45 17 or bigger. Use 3" lug studs at all 4 wheels and play with spacers to get the proper wheel backspacing to work for...

For the ball joints and rod ends I would recommend Only proforged. Amazon or summit razing should have them. Avoid Moog/ Federal Mogul joints and rod ends. I used the Reilly Motorsports Adjustable strut rods. I am sure they have them or can make them, I do not believe they are listed on their...

Yes Post it up. More Fantastic 24hrs/Lemons A bodies = Good stuff!

9 Second Slant six Barracuda: 11 Second 1968 "Ruster" Slant Six Enjoy! Greg