Search results for query: *

  1. T

    Speedo cable

    Hi is there a certain lube i should put on the ens of my new cable i am going to install? Graphite maybe ?
  3. T

    Green bearings & sure-grip center units

    what would happen if you left the thrust pin in? pre mature axle bearing failure?
  4. T

    pinion angle update

    ok folks sorry for being the village idiot but in the above pic's on the gauge i see the numbers 260 and 230. how does this apply to the 2,3,4 or 5 degress we have been speaking of????
  5. T

    Shifter Locking Up

    gts does it lock up all the time ? any gear ? you may just have someone sit in the car while your under it and go thru the motions. sorry i don't have a pic but they are on the internet if you search for 4 speed a833 set up. you can start from scratch and put in new bushings and clips and...
  6. T

    727 I.D numbers

    thanks moparteck that helps.
  8. T

    727 I.D numbers

    hi folks i bought a big block 727 and am wondering what the last 8 digits means on the pan rail i have figured out pk3515847 is from a 71 440 but the last 8 numbers 3694 0064 mean what? any idea's terry
  9. T

    Options to increase strength of 7260 U-joint

    as referenced by 412 stoker the u-joint gridles work very well.can be made easily but try e-bay for pricing terry
  10. T

    Magnum 360 Oil Pan

    sounds as if you got a pan for a 360 and you have a 340 stroked? they are different pans the size of the rear main is different terry
  11. T

    driveshalf length

    well i can tell you that 3.5 to 4 inch is to much.i'm going thru the same problem and after checking a few internet sights what seems to be a safe measurement is 1 to 2 inches of yoke sticking out of the rubber seal of the trans.so with your shaft pushed in that far measure from the center of...
  12. T

    Z-bar for 440/4 speed TTI blowproof?

    give a call to brewers.these guys have probly heard this a hundred times and can probly get you going in the right direction easily. terry
  14. T

    8-3/4 questions

    The Axles On My 68 Barracuda 8 3/4 Were 27 3/4 Inch Total Height.actual Length Can Be For Giving If You Were To Use The Green Bearing Set Up Which I Highly Suggest. Terry
  15. T

    Rear End Fluid

    It Does Sound Like Your Housing Is Maybe Bent.i Had The Same Problem With My 8 3/4.i Found Someone On E-bay That Builts 8 3/4's On A Jig.great Product And Great Commiuncation With The Guy.if Your Interested Pm Me And I'll Send You His E-mail.price Was Very Good Also Terry
Back
Top