Search results for query: *

  • Order by relevance
  1. D

    Planning the Build

    That's probably when they were like 500 miles away, I admit that I should've went anyway. I'm focused on not being to picky about the color and pretty much have given up on getting what I want I'm more thinking on getting one that I can make do and enjoy
  2. O

    Planning the Build

    I know that cause u posted that in many of your wild goose chase threads. Many times a decent car was recommended by someone but u turned tail and ran cause it was too far, wrong colour, didn’t have this, didn’t have that. There was more than a few worthy cars but instead of bucking up u had...
  3. str12-340

    74 HEMI Dart Sport

    Good things come to those who wait!
  4. str12-340

    zinc oil useage?

    so if this is my choice: loosing 5 hp vs having the engine last 20,000 more miles, I'll pick the more miles... bring on the zinc! I've been using Penn Grade in all my motors since the whole zinc thing came to light.
  5. Magnum440+6

    Hot Mopar Babes III

    Three for Thursday
  6. str12-340

    Carb help * the famous debate and 2x different cars

    Well, back to the OP's question. Both of the cars are primarily street driven, correct? If I were you I'd stick the 750 Eddie on the crate 360 and drive it for a while, see what it does for the type of driving that you do - you already have it, you might be surprised. Don't screw around with...
  7. D

    Planning the Build

    Dan, most Canadians have traveled many times in the USA. You saying that towards a Canadian is more unfair than people chirping you about buying a car at this point. Just stop over thinking your dream and pull the trigger.
  8. J

    Planning the Build

    savage. all y'all are hereby on notice. daniel's newfound enlightenment has gifted him a sense of humor with a dash of snark! can you now multiply large numbers in your head without the aid of a calculator too? inquiring minds and all that...
  9. B

    zinc oil useage?

    S'cuder. You sound like a very sensible guy. I am sure Lake Speed is very knowledgeable. I don't want an opinion, I want to see a test that compares the same oil with & without zinc in it. Then the result is fact, not opinion.
  10. B

    zinc oil useage?

    NB Turk, You better contact Lucas Oil company & tell them they got it wrong. While still looking for something on the net that proves zinc is a power eater [ found NOTHING ], I came across a Lucas advert that claims because it has MORE zinc in it, it INCREASES power...because it...
  11. B

    Plug and play distributor

    Buy a new pick up!
  12. D

    Planning the Build

    How would you know, you live in Canada
  13. 65barracudaLA

    65 Barracuda daily driver

    The transmission was still leaking, so I got this newer style of pan and gasket: I don't think I need the extra capacity, I just wanted a pan that's not 60 years old and bent. The drain plug is a big plus too. Transmission Pan Gasket Unfortunately on a cable shifted early A904 it...
  14. B

    Carb help * the famous debate and 2x different cars

    NB Turk, I don't give advice. My BS meter is starting to peg the needle in the red zone with all your BS. Your comments further show how little you really know. Air bleed action is so fast & transient that A/F sensors are far too slow to pick it & only react after the fact. Below is...
  15. mopar head

    Planning the Build

    The world is full of surprises, hang in there Kim, it`s coming! Hell, he might of refinanced his house and found a 71 Hemi Cuda, minus the engine:)
  16. 65barracudaLA

    65 Barracuda daily driver

    Thanks! I tried that, but in the upper hole it wouldn't start and in the lower hole it didn't really make much difference. I ended up using some carb cleaner and then adjusted idle, timing and idle mixture and the stumble is gone. Also adjusted the choke and fast idle and now it starts really well.
  17. O

    Planning the Build

    anything that was even in the next state was 2 far away. So my guess is he never bought anything. Kim
  18. D

    Planning the Build

    The world is full of surprises
  19. mzak88

    74 HEMI Dart Sport

    Project still on hold but not for long. Stay tuned for link to new thread.
  20. B

    452 heads on a 1965 Wedge ?

    Yeah 12:1 on pump gas...& iron heads. Yeah right. That is why we are all doing it........because it works every time. Every time now I see a post by Newbomb Turk, the needle on my BS meter shakes violently..... I have had engines with 8.5:1 CR detonate on pump petrol. There are many factors...
  21. cpearce

    Malwood underdash hydraulic kit for A-Bodies

    @Muswagon Is your install complete, if so how is the pedal feel? Where did you route the hose to the throwout bearing?
  22. J

    Planning the Build

    bah gawd if that happens i'll eat my hat! what's the current betting line? anyway, he's too cheap to ship something. so it's gonna be some lump of **** that he scooped up from a local corner lot/flipper and you just know that she's a full on Monet.
  23. 4fortyDemon

    [WANTED] Tunnel Ram

    I know someone in Vegas that has a small block tunnel ram intake for $450
  24. Dana67Dart

    Tell me about your ballast resistor failure.

    56 years and 324,000 miles, still going strong.
  25. Dana67Dart

    Front suspension height

    Yep, not even a fingers width.
  26. Dana67Dart

    Rear axle frame bump stop

    Download your years part book from mymopar.com look up the part number and Google it
  27. Michael Siple

    15 inch wheel on 72 Demon

    255-60-15 with a clearance cushion - I tried a 275 on but its too close to the spring for me. 71 Duster - ought to be the same. this is the small bolt pattern wheel from wheel vintiques
  28. mopar head

    Planning the Build

    He said it`s almost here, making it`s way across the states now. I can`t wait to see what he got , how about you?:)
  29. Dana67Dart

    Cross reference

    Parts book has sections of "common parts" but they do not have Chrysler part numbers.
Back
Top