Search results for query: *

I'm ordering my 408 Stroker kit Monday.You guys talked me into it!! I'm getting cam and all. Which oil pan? I can get a mildon or whatever with the baffles for a $129. from the same place or a shiny chrome one on ebay for $59. or factory replacement. for $69. Why pay more ??? Is there a...

I can buy one of these kits on ebay for $385. which looks to have everything.. or Purchase the 408 assembly for $1200. What to do??? Don't even have a car for it yet but Might as well have it ready... Any advice? I'm thinking street not strip. Dodge Mopar 360 Master Performance engine...

OK I just pulled her and tore the pan off ...Wasn't the windage tray ...I don't know what else I should be looking for????? I took off the intake and there is one pushrod with a scar on it (picture below) But can't see anywhere it would be hitting.But it was a loud knock!!! we talked about it...

OK , Again I pulled the engine tore it down "had the internals balanced" put it back together ..Fired up like a dream .. BUT I'm hearing a KNOCK in the engine. I haven't spent much time on timing it. Just heard this knock and after about a minute shut it down... ANY thoughts??? Did I do...

Ok my previous thread I was thinking or asking for a flywheel... Now the engine is out the pans off and Can anyone tell me if this is cast or steel Crank and what flywheel and balancer do I need....Please!!??? BACKUP OR RECAP: Have a vibration in the engine ,did since I put it together. OK so...

I was having trouble last week with starting the Duster... After lots of troubleshooting heres what I found. I believe timing was off!! See any problems that I don't? I am taking the heads to the machine shop to be redone and I think I might need a set of pushrods.. Anybody interested in this...

Well my thread last week I asked you guys for help to get my car to run... Had lots of good feedback but she still wouldn't go.Thanks Guys!!! I Believe I found out why it doesn't.... I checked compression last night and theres NONE. which I believe means the valves are bent.. Right. So I...

OK just change rear main hooked all back up and nothing.... 340 engine. Ok heres what I know... #1 Piston on top center ,distrib. pointing at #1 and Balancer on center mark.... Gas in Carb... Everything else looks right... Didn't check spark yet but worked before dismantle... 1st...

I've taken my car for a 3 mile drive for the second time and after pulling back into the garage theres OIL dripping out of the cover on the bellhousing. Newly built engine ,Did it myself,with a 833 hooked to it. All I can think is rear main seal... how can that be? what else could it...

YEEEEE HAAAAA!!!!! :cheers: 7:02 APRIL 9th ,I started it! After all the issues and questions You guys and gals helped me through...SHE FIRED RIGHT UP!!! This is my first so I'm excited!! Just want to take the time to say THANKS!!!!!!! Of course I'll still be a very needy sole with lots of...

OK I rebuilt the 340 "BY THE BOOK":read2: its ready to start for the very first time....but It turns over so hard kills battery in one turn... Should I or can I do something to help? I've never done this before so I'm a total rookie.Is there something I'm forgeting or is there something I should...