Search results for query: *

Please, don't beat me up too bad. I am having a slight issue that I can't get right. I have a 1967 Barracuda. I replaced the 318 with a magnum 360 about a year and a half ago. It is a crate 360 magnum from Mopar. I used the 318 exhaust manifolds and there in lies my issue. I had to...

I have a new Mopar 360 magnum crate. It has been in the car about 4 months, runs good, sounds good. It has about 500 miles on it and I have changed the oil once since install. It doesn't smoke and there are no oil leaks but I have had to add a qt. and a 1/2 of oil to it a couple of days ago...

On August 24 I installed the magnum mopar crate, it runs good, not fine tuned yet, why? I don't know how to do it. It is not that bad but I am trying to take care of smaller issues first like exhaust leak I can't seem to stop. But today on the way back from a friend's house I punched it and it...

Yea, started the 360 magnum yesterday at 5:18 pm and after a few tries it stayed running fairly well. The project continues with the biggest issue being exhaust leaksssss. I am using the stock exhaust for the present time, cash flow issue, and I thought it was pretty tight during install. Man...

a M 1 intake on a 360 magnum MP crate engine. All I can find is 45 ft/lbs and that seems like quite alot. I have also seen 35 ft/lbs and that still seems like alot. I started to put 45 on tonight but quit because it just feels like too much. I then started to put on 35 and quit again because it...

I have alot of questions but I will start out with this one. Can I use the power steering pump from my 318 on the 360? I can tell just by looking that the brackets won't work, there is no where for the bracket on the 360 water pump. What is the way to go with this? What pullies will I need...

I am about to do a 360/318 swap. What bracket can I use to put the power steering pump on the 360 from my 318. The 318 brackets are not going to work. It looks like the alternator brackets from the 318 will work?? What radiator do you all use? All help appreciated. Perhaps I need to add that...

Does anyone have any information about Promax. I am looking at a 360 they have on their site, www.promaxcarbs.com, and I think I want it. I am a little concerned about the CP 11.5-1. However, it is hard to pass up because of price. Does anybody know anything about Promax. Thanks for any...

I do not know anything about casting numbers, my bad. I am looking at a 360 with the following cast #, 4006830-360-2. I know it tells me it is a 360 but what else does it indicate? I assume it tells the year. But I don't know? Any help would be appreciated. They want 500 for it complete. Just...

I think I am detecting a pattern here. This concerns me a little. I am about to start a build of a 408 and I want to use the roller block 360, 1993 and later. However, I read where FABO members, Mark Nixon has two 360's, 1993-up, that are for sale and both had this issue. Abodyhotrod has had...

Alright, I'll be the dummy for the day. I have heard the term, quench, when reading about engine builds. I'll cop out and admit, I haven't got the slightest idea of what quench is, what it does or if it just means you guys are thirsty. Don't all of you laugh at once and don't beat me up too...

I need a bunch of advise. I want to build a 360 for my 67 Barracuda vert. I will have to buy a 360 and I would like to know what year is best,if any, or does it matter? I would like to end up at 500+/- hp. Do I have to build a stroker or is there another way? I have alot to do besides the motor...

The problem is too much heat. It is boiling (perculating) the gas in the carb after I shut down. I am going to get a heat suppressing gasket but I have a clearance problem. My air cleaner is already pressing into the insulation as it is. If I raise the carb a half inch with the heat gasket I...

Alright this is a question I would like help with. What is the simplest way to replace the rear main seal on this engine. It is leaking real bad. I have a basic idea, I'm just wanting to find the easiest way to do this. I'll be doing it like most of us do, on my back on jack stands. It is in my...