Search results for query: *

hi folks well I have had a vibration for years but to narrow it down roughly the vibration Is there under acceleration and stops when I let off the gas pedal. the vibration gets worse the faster I go and it is not in the steering wheel just the body of the car. my rear view mirror in the car is...

sorry folks my prior post should have been listed with snubber adjustment

well after years of wondering why my car would not leave the rubber marks on the street when I would do a burnout I always thought it was my ss springs that are for a 64-65 b body 3400 lb. but finally after looking at the pinion snubber it was about 3/8 " from the floor board. so once I remover...

hi folks for years I ran the mopar off set spring kit but seemed to have problems so I have purchased dr. differentials off set kit and really like the front hanger idea of no drilling into the frame for the nut ,BUT I think the rear shackle brackets and bolts are not as strong as the mopar...

Hi folks, if i put a 3/8 thick shim between the frame and front leaf spring hanger for tire clearence and the wheel well will i be also loading the rear springs? Good or bad ? Street driven car. Thanks terry

hi folks can any body give me some idea or part numbers for a correct shock to use with my ss springs on my 68 barracuda? i do currently have mopar ss shocks on but feel i could use something new. and they are discontinued for the 4 speed application. the closest i find are some monroe gas...

anyone know if i would have any problems fitting a hellwig rear sway bar on my 70 duster 8 3/4 with a disk brake kit from The Right STUFF ? the calipers are mounted on the front of the rotors.don't think i will but thought i would ask first. thanks terry

why does kyb only offer one part number for the front of a-body's no matter what the suspension or engine size is. seems to me you would have a different shock for a slant 6 with drum brakes compared to a 340 or big block with disc's.are all shock manufacturers the same way? terry

does anyone sell a heavy duty front spring hanger that is NOT an off set shackle design but does have the 2 5/8 holes for the leaf spring to mount?

Hi folks does anyone have a link to modify a slant 6 k member for a 440 ? i already have the shumaker brackets and the k-member has been notched for the oil pump. but there should be areas of the k-member that should have gussets added along with the reweld of the terrible factory welding. i did...

hi folks maybe you can give some info on this i have p/n 3690457 on my passenger side and p/n 369045X on the drivers side.i see no one with the x part number for sale. i see that they are listed for a 64-65 b-body at 3400 lbs. car runs great and haven't had any issues. there on a 68 barracuda...

hi folks here is my question i have a 68 notchback barracuda that i had pulled the rear end back to mount the front hole on the axle spring perch to the super stock springs. i also drilled another hole on the shock mount plate to help align the leaf spring center bolt.now this did give me the...

hi folks i haven't been able to locate the thread about removing the lca bushing but it had to do with welding a large flat washer to the out side of the bushing with a threaded bolt thru it.then having the lca in a fixture of some sort but as you ran a nut down the treaded rod it would pull the...

hi folks is it necessary to remove the thust pin from an 8 3/4 limited slip with stock axles and green bearings installed? seems like my rear end is getting louder thru time wonder if leaving in the thrust pin might be the reason thanks terry

hi folks is there a way to remove the coupler from a manual steering box even after i have drilled out the pin and of course used a hammer but to no progress yet? the usual wd-40 soaking didn't help. i'd like to sell the box but feel it should be removed first. terry

hi folks need some input here how can you tell if your rear end is tracking perfectly straight? if i measure the distance from the front of the drivers side tire to the bottom of the wheel well i get 1 1/8 inch. but the passenger side i get about .875 in this makes me think the rear end is...

hi folks does any one know the number of leafs on the 002,003 springs? thanks terry

hi folks need some input on ss springs. it seems almost all referenced ss springs for an a body are the 002,003 part numbers. now in the chrysler chassis mamual they say these are for a 3000-3200 pound car. so what if your a body with a 4 speed is more likely around 3400 pounds. do you step up...

does anyone have a perference for a certain brand for the 7260 style u-joint there are so many out there and the great margin of them are the one's made in japan. i think spicer or lakewood brand are good thanks terry

ok folks i'll try and explain my spec.'s and tell me what you think. putting a cheap harbor freight degree finder on the flat spot of the rear end yoke with it being parallel with the floor 1/2 tank of gas and driver in the car i get a 7 degree reading. when i mount the fixture on the input...

hi folks does anyone know the part numbers for the moog brand tie rod ends and sleeves for a 70 duster. i'm looking for 11/16 size which seems to be an issue. i know the ES401 L&R is 9/16 for the a bodies even with a big block but i can't seem to find if the 11/16 is avalible. i see firm feel...

Does anyone have the thread that showed what to do on welding up a k member to make it stronger. Seems like i have seen the thread in the past but can not find it now. Thanks terry

I Currently Have A Set Of Offset Spring Hangers On My 68 Barracuda.i Notice That There Is Only One Hole On Them For The Spring To Mount As Compaired To Some Of The Stock Ones Have 2 Holes To Mount For The Body Hieght.question Is Can I Drill Another Hole 1 1/2 Inches Higher So The Spring Will...

i have a 68 cuda ss springs.it appears when i launch ( 2000 rpm)the car the wheels brake loose very easily.i know the body is suppose to rise but i think my kyb shocks are to short for total extension.anybody know what the total extension should be for the rear shocks? any ideas other then race...