Search results for query: *

1973-76 Sliding Caliper Brackets. Sandblasted and Powder Coated. Nice set. $30 + shipping. Located Bernville, PA. I take paypal.

For sale is a set of Sliding Caliper Adapter Brackets to use with the 10.87" Rotors. $50 OBO plus shipping, located in Bernville, PA. I'll be going to Carlisle Friday and Saturday so meeting there is an option as well.

This is out of a Truck, it will work in a car just need to use the truck side cover because the reverse switch is activated different on the truck compared to the cars. I cleaned most of the grease off. What you get is the main case with the reverse gear and the side cover. $70 +shipping...

Slant 6 torque shaft good condition no rust, just a little yellow overspray. $30+ shipping, OBO.

Original clutch fork boot. Rubber is still flexible. Part# on boot: 3515 300 42332 15 M- 14952 $15 +shipping OBO.

Big Block oil pick up. I had it screwed in the block once. $45 + shipping OBO. If your rebuilding a Mopar B or RB engine. When the block is at the machine shop have them drill and tap the stock oil pickup in the block for 1/2" size. With the 1/2" pick up and a high volume oil pump the stock...

Stock 5.2 Magnum Cam for sale out of a 1995 block. $20+shipping 5.2 specs: Duration: 251In./264Ex. Lift: .432"In/ .432"Ex Cam centerline 113*

I have some left over parts I won't be using. First are 2 T-stat housings. The painted one looks pretty much new, I painted it with high temp engine paint, was going to use it on a 360. The second one is used, it is corroded, I cleaned some of it off. $8.00 for painted one $5.00 for other +...

7 blade cooling fan part # first line: 3870 107, 2nd line: 24654. This was on my Duster when I got it, and it moves a lot of air. Comes with spacer and bolts. Located at 19506. $65+ shipping OBO

I'm selling the pistons from my 403. If you have seen any of my more recent threads I blew the head gasket, took the motor apart to get it rebuilt and found that I need to over bore it more. So the pistons are up for sale. The pistons are a .005" overbore for the 5.9L. The reason for this is I...

I'm selling the original radiator that was in my 1976 Duster when it was powered by a /6. Previous owner swapped in a V8 and the radiator was in the trunk when I got the car. So i'm not sure what condition its in. Doesn't look like it leaked and the passages look open looking into the rad...

Cleaned up most of the yellowing on the manifold, pretty much just to see if it would. I think all it would need to look new is a little beadblast. All threads are good. Looks a little better than what the picture shows, I don't know why it looks so dark. $75 +shipping, Or trade for a small...

Lunati Street Avenger cam never used. Lifter included. Was going to use this in my 383, but going different direction with cam now. $90 OBO + shipping. Specs: Duration @ 0.050 lift: 216I/ 228E Lift: 0.454"I/ 0.480"E (with 1.5 rockers) Lobe separation: 112*

I'll try and get the cheapest rates possible for shipping. If you are cross country then USPS Flat Rate is usually cheapest. I'll take paypal payments. I'm also going to Carlisle, and can bring parts along. Stock 5.2 Magnum Cam for sale $35+shipping 5.2: Duration: 251In./264Ex. Lift...

I have a 46RE transmission that I am not going to use anymore. Trans came out of a 1998 Ram with the 5.9L. 2wd. Truck had around 12,000 miles on it when it was wrecked. $200 OBO. Located at 19506. Will not ship pick up only or will drive up to an hour to meet half way. I will be going to...

'66 steering column from a Dart, I think. Power steering, column shift. Missing the shift lever. $45 OBO +shipping. Located at 19465.

I have a 46RE transmission that I am not going to use anymore. Trans came out of a 1998 Ram with the 5.9L. 2wd. Truck had around 12,000 miles on it when it was wrecked. $300 OBO. Located at 19506. Will not ship pick up only or will drive up to an hour to meet half way.

I have a stock exhaust system from a 2009 Challenger SRT-8 for sale. Outside diameter of the exhaust is 2.75". There are about 200 miles on the exhaust when it was taken off. No rust. This might be a cheap way to upgrade the exhaust system on an R/T Challenger, not sure about that though you...

I have a A-833 out of an A-body that I am considering selling. I think its out of a Barracuda, but not sure. It is a cast iron case, 23 spline input shaft. The input shaft is rusting, might be able to be cleaned up, or might need replacement. None of the gear teeth are chipped or damaged...

Lunati Street Avenger cam never used all of its still in the original box. Lifter included. It was $200 new. $150 OBO + shipping. Specs: Duration @ 0.050 lift: 216I/ 228E Lift: 0.454"I/ 0.480"E Lobe separation: 112* http://www.summitracing.com/parts/LUN-80440LK/

Original 1968 Chrysler Newport 383 water pump. One of the water neck bolts is broken off in the pump housing. $40 OBO +shipping.

Cast 360 magnum crankshaft out of a 1996 Ram. The Ram had less than 12,000 mile on it. $50 OBO +shipping.

I have a set of 8 connecting rods and pistons from a 383. $35 + shipping OBO.

I have a 2 barrel carb off of a 1968 Chrysler Newport with a 383. Not sure if its originally or not. It needs a rebuild. $30 OBO + shipping. Also have a 4 barrel Holley Carb. I think its 600cfm. $40 OBO + shipping. Linkage does not come with carb. Numbers on it: 80457 1173 SR 7809 B

I have a stock, 2 barrel, cast iron intake manifold off of a 383. Engine was in a 1968 Chrysler Newport. $125 OBO plus shipping. Also have a Edelbrock Performer 440 aluminum intake manifold. It has the heat crossover. $150 OBO plus shipping.