Search results for query: *

Quicktime BB Bellhousing Mopar Chrysler Dodge - auto parts - by... - photos and all located on CL Quicktime 6079 bell housing for Big Block Chrysler Mopar. Comes with McLeod 464102 flywheel (https://www.summitracing.com/parts/mcl-464102/reviews) , clutch disc (see pictures) and ARP harware (not...

I will be attending Muscle Cars at the Strip in Las Vegas on March 20-21st. If you would like these, I can bring them. Please PM me so we can coordinate. TTI 400 SR headers with ceramic coating, thermal barrier, evacuation tubes and 02 bungs. These are for B and E Bodies ( Charger SuperBee...

This is a brand new kit for the 67-72 A Bodies. Want to up grade your brakes but don't want to change your A arms or spindles and search for parts - here is a solution. This is brand new in the box - I decided to go a different route. See them at Summit here: Wilwood Forged Dynalite Pro...

Purchased this Power to Manual Steering adapter but decided to go another direction. This is brand new, never used with instructions, pins and plastic bag. $80 shipped to lower 48 - paypal only please

Cable hood latch cable three throttle cables, one plastic square two ovals Small block mount front skirts clutch spring idler arm $10 for each plus shipping

Have few Gen III parts: 1. Truck Pan (Rear Sump) with pickup $30 2. Car Pan (front sump) with pickup $30 3. Windage tray $10 4. Oil Pump $20 5. Truck Intake with injectors, fuel rail, and throttle body $30 6. Car Balancer $15 7. Truck accessory cover $30 8. Car accessory cover $40...

Older nitrous plate for Dominator with a 4150 adapter plate Asking $80 for both shipped to US using PayPal

I believe this is a Summit brand, but not sure, never used and would like it out of the parts pile. Asking $70 shipped to US using PayPal

I have leftover used fittings from installation of my fuel system along with Earls fuel line and some braided line. What you see is what you will be getting $30 Shipped US using paypal

I have a Innovative LC-1 kit wired and ready to plug in. All you need in a gauge, PC, or other device to check the readings. Great kit, a little older system but it works excellent, especially for tuning. Asking $80 shipped in US using PayPal What you see is what you will be receiving.

I have switched to a Dakota Digital dash and have nearly brand new Autometer ProComp oil pressure and water temperature gauges with bezel. These are still in the car, I used them to verify the DD gauges - spot on. These gauges are mechanical, DD's are electrical. Asking $140 shipped in the US...

M-2 Dual "COMPLETE" Kit includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, (2) weld-in bung and plug kits, and manual. Bought this for...

Decided to go to a spool, so selling my Sure-Grip - cone type, worked when installed, but has been sitting for a bit so has some surface rust. I would replace the bearings, been rolling around my garage for a bit. Asking $200 shipped in US

I have a set of 3:23 gears from a 10 spline 489 with the 10 spline yoke. I would like $125 plus shipping. There is a light patina on them, but no pitting or issues, I had planned to use them, now have a 5 speed.

I have a set of 3:55 gears from a 10 spline 489 with the 10 spline yoke. I would like $125 plus shipping. There is a light patina on them, but no pitting or issues, I had planned to use them, now have a 5 speed.

Have a Holley HP body with a Proform plate, rebuilt 72 (5.5 PV)/82 jets, never been ran ready to go. Very nice item, just need to clear out a few item. $350 shipped to US and using Paypal

Jegs BB water pump - decided to sell all my electric stuff and go back to the factory original cooling system. These work very well, have no issues with it - just don't need it laying around. $110 - shipped in the US... JEGS Performance Products 50930: Electric Water Pump Big Block Mopar | JEGS

OK - brand new single electric fan from a Ford, with pig tails and mounting brackets. Was to be used on a large factory radiator of a 440 Cuda - decided to go back to factory. (Fan, brackets/shroud, and pig tail only) $125 shipped in the US

Bought this with a kit, did not need it. missing the two small brake lines. Asking $80 plus shipping Wilwood 260-13190 https://www.summitracing.com/parts/wil-260-13190

I have some fabricated valves covers collecting dust. I would like $50 plus shipping to you, paypal only. I have most but not all of the bolts, the baffle plates have been removed and they have orange overspray on them. Functionally they are fine, just need some polishing.

I built this for my Dart and a BB, never got to use it: Powerglide: Completely rebuilt never ran. Deep aluminum pan, new JW reverse manual valve body and trans-brake. Also comes with: 4000 converter from JW, never used still in box Flex plate, balanced to external motor, however...

Welcome back to the 80's - Here are a set of valve cover T's which came off my SB. Asking $10 shipped Paypal

Have a manual brake valve and the shorter non-power brake rod. Asking $25 for each shipped Prefer paypal Will also trade for items looking for in the "wanted" section

ummit Ready to Run distributor - new, never ran (comes with used cap and rotor, I am using the HEI cap and since I was there took the rotor): http://www.summitracing.com/parts/sum-850028 - $150 plus $13 USPS shipping

This is a new MP Distributor, never ran Asking $75 plus $13 USPS shipping

This is a 1973 Duster wiring harness from bulk head to all three (3) main connectors, Asking $40 plus $18 for USPS shipping PayPal please

I have a 1970 Duster dash harness, one wire is cooked and looks easy to replace, harness looks good. This came from a /6 AC car. Asking $25 plus $18 for USPS shipping PayPal please

Crank and water pump pulleys asking $15 plus the ride. Should be able to fit in medium USPS for $14 Paypal please

Cleaning items and time to move forward, here is what I have: 73 Grille - Looks fair, would like 50 plus S&H HEI Kit, bought from Trailbeast, asking $80 MP SB Distributor - $100 - Never ran Summit Ready to Run distributor - new, never ran (comes with used cap and rotor, I am using...

This is a 985 carrier which is the same as a 742, just an older model (please do an internet search) with the 1 3/4 pinion diameter. I bought this for the sure-grip unit and swapped it for an open carrier as shown. This has 5.50 gear (44 ring teeth, 8 pinion) by Richmond. Gears are in great...