Search results for query: *

I have a 750 holley with vac secondary.Noticed the car would kick back when i first tried to start it after sitting over night.Ipulled the carb off and saw gas laying in the intake.I put it back on and set float levels. The next day i looked in the sight glass on the bowls and saw both bowls...

Had a 750 holley with vac secondaries ran and idled good.Saw raw gas in intake when i removed carb.Bought new 650 double pumper.I have to turn the mixture screws out 3 turns to get it to idle right but still has hesitation.Why do i have to turn the screws out that far opposed to 1 1/4 on the...

Is a 650 holley hp double pumper worth paying the extra money for or is a standard 650 double pumper just as good for the street

Where can i get the rubber grommet that goes on the gas pedal assembly under the clip that holds throttle cable for 70 duster .

Where can you get the clip that holds the throttle cable where it goes through the fire wall on 70 duster 340. Does a washer go underneath the clip.Are these called horse shoe clips and where can i get them

Looking for someone to restore my 340 air cleaner any suggestions.Thanks

I have a 70 duster 340.Has air gap manifold with 3310 750 holley.I would like to run the original air cleaner.Can you modifiy the base to drop the height so the hood will close.Does anyone know how much higher the rpm intake is compared to stock intake.I thought elderbrock web site had this info...

Have 750 dp 4779 carb on 416 stroker.Everything is good except at idle.Gas smell is so strong runs you out of garage.Power valve is correct size and is not blown float levels are correct. Have not cked throttle blade for correct setting yet.Are these 750 dp known for rich idle circuits.Holley...

New tank leaking around seal and locking ring.Where can i buy the correct seal and ring.Thanks

I have a 70 duster 340 and would like to run the original breather with the 340 pie pan.The carb is a 750 holley on a rpm air gap intake.Has any one done this.Maybe run a drop base with the original lid.Have hood clearance issues with stock set up with this intake