Search results for query: *

Does anyone have a parts breakdown or explode view of the center console shifter? I have a shifter that was apart and trying to find out how the dent spring is held in place. It is the spring that goes behind the dent to push it back into the notches. I have the service manuals, but they do not...

I am getting things together to rebuild an 489 case and have a question about the 4 bolts that hold the bearings onto the case. What size are these bolts? Has anyone used the ARP bolts or studs in this application? I don't know if the bolts in the case are any good after all this time and it is...

I have a 8 3/4" cone posi. rear axle that is making noise, so I pulled it out to find out what is going on. I used the 80W90 oil with the Mopar additive. That is not my question, I have a question on what oil to use and what additive to use if any. I am using Valvoline's 80W90 oil. Do I use a...

I bought an 8.75" axle from someone here on the forum. It measured good. Put Mosier axles and Dr. Diff disc break kit on the axle. everything fit well with no problems. The axles required a little tapping to be seated, but not that bad compared to some I have done. Using 255-60/15 tires on steel...

Who is using a Tremec 5 speed transmission? What are your thoughts? Do you like it, like were the shifter is? And the modifications. I was wanting a 5 speed but with the shifter in the stock 4 speed hump. It seems that the Tremec TKO you have to use their hump and modify the tunnel. I am...