Search results for query: *

80840 shifter, I was lead to believe I could indeed set it up for a 904 dodge transmission, and some conflicting information saying I can use it. Pictures below show I can, but some searching shows its just for a two speed gm transmissions.. It would be nice to change a shift plate in the...

I have pulled my fresh 904 out of my 85 Ramcharger, 318 , what can I do to use the TQ converter on my 360 Thank you all again, my computer is acting up and now using my phone witch I am not use too.

Need help here today

I think there is two different 8 1/4 rear ends (Late modle/ early model) but is there two different sizes of pinion seals on these rear ends ? I need to order my bearings and seals and just need to make sure :coffee2: I could just remove the outer seals and bearings and have them matched...

He is having a problem, at 700-800 rpm if you shift from Park to reverse, its very hard He is about to pull the valve body and see what is going on, he don't race this nice Dart but changing just the accumulator spring help this ? everything works good.. It has a shift kit of some kind and I...

When I go to look for a 1966 67 auto trans (I have a couple to look at tomorrow ) what cast numbers am I looking for ? For instance this trans is for sale and has cast numbers on it, where would I find the reference numbers I need for my 66 170/6 engine ? I do know I need a 18 spline out...

And attach an after market cable shifter on a push button transmission ?

After today I am thinking it is time to change my 3 on the tree standard and go automatic in my 66 170 /6 Valiant, I will be looking threw some of our tech pages and learn what trans I need and what all it will consist of :glasses7: Kick down linkage no problem, and I need to change my drive...

Yes it is a pin hole, It don't leak almost when it is cold, one cup in 20 hours. when I seen it I parked it and it drips 3 times faster when the trans fluid is warmed up.. I have the pan off cleaned and pored gas in the pan to locate the hole and mark it, Can I sand this area down and J.B...

Creed has an opportunity to pick this trans up.:happy2: It came out of a 69 Nova and is ready to bolt up to a bell housing for our 360. My question is will This Sagenaw "how ever you spell it" Bolt up to a small block mopar bell housing ?? Again I thank all the great tech's here for all...

I sure hope this chart is correct it looks like they are saying the 8 1/4 will fit under our 65 and 66 early A bodies :cheers: just a spacer to move the wheel out 3/4'' and shorten drive shaft 1 1/2'' and move the perc'es in about 1'' and I know they will be LBP. But I have learned you can not...

I have herd that if I can find a sure grip 7 1/4 it would be stronger and last longer with my standard trans, So I need a tech to help me on this rear and what if it needs rebuilt or is this the kind of sure grip that can not be repaired Here is the link to the E-bay sale...

Is it possible ? The way I understand its allot lighter and will give me a few more MPG and HP, Creed said he can even put a hydraulic assist like they use on strait line cars and circle track I have seen them on V8'es and they seem to be very strong. Does any of our members run one? My...

I can not find anything on the net that will show me a picture of the 3 speed standard trans I have in my 66 / 170 Valiant so I can service it :angry7: Before I crawl under her I would like to know what I have and how to drain the fluid and what I should use to refile it, My books are in...

I have a 66 170/ standard three on the tree. What trans do I have ? and are the three speed floor shift trans the same? I am thinking of going to the floor and would like a floor shifter that will bolt up to my tranny like oem, Does the trans have the holes for the floor shifter to bolt too...

I myself and a friend removes this rear end out of a 68 or 69 383 cuda 7 years ago in a scrap yard. But can the numbers on the rear end give the year and or gear in it. A tec's test for sure:cheers: Good luck,

Well I have ran into a stop on this rear end.:cwm10: I thought it would work in my 66 valiant but it is wider 5 friggen inches:scratch: It is a perfect rear end and I thought I could use it in my 66 valiant. I was going to move the spring perches in a 1/2 inch and know I see that it...

63 push button trans has to go this push button trans is gone.it is a 225 eng .I am going to find a newer /6 trans and put it in. There is somthing about this 225 63 model motor and putting a newer one on it. I will pick up a new converter for the newer trans but I am not sure what I need,It has...

I am going to pull my first pushbutton 904 trans to replace seal.Are there any surprises on droping this trans. I have pulled 904 727's but never a pushbutton.how bad is it to disconect linkage,If any.And thank you for you time. :salut:

I have a 63 valiant 225 w/904 push button auto. This car came factory with exterior filter for the trans, don't have a part #, what can I do about this problem? I have blowed the front seal and need to repair. I thought of another hydrolic inline filter but I am afaird to restrict flow w/the...