Search results for query: *

I have a 999 transmission in my 69 dart. It came out of an 87 van. it’s got a switch on the back of it that looks like a temp sender. It’s not a temp sender. It operated the lock up clutch on the torque converter. However……I don’t know how it operates the lock up. im getting a lot of mixed...

Mechanical override: Lockup torque converters This article shows the lock up clutch after 1986 to be activated by the lean burn computer. My transmission is 87 and has this style.... It is controlled by a relay that is ground activated and sends power to the clutch according to its...

4431556 87 custom high roof van, fully loaded 318 Lock up clutch wi5 single wire coming out of the back port. Has a 904 torqueflite. The chart doesn’t go up high enough to identify it. Is this a 999? Does it have the lower gear set

I just tore down this 904 I’d like to know what kit to buy or what separate parts are needed to refresh this or whatever it needs. It had no problems shifting before I tore it down. I had recently changed the fluid. There was a lot of black powder in the pan when I pulled it to do the...

76 transmission. All original Original converter This looks like a leak. Not bad that I know of. The converter seal is new- this is cracked-looks like part of the seal in there this is the other side - just a closer shot I’ve got to get this back in no matter what. I’m just trying to...

Can I drill the floor board and drive the seal in through the top of the car? It has no carpet. Then just plug the hole. Going to look at this tomorrow When I parked the car for a week or so. The fluid all leaked out. I don't know where from but I'm guessing it came from one of the two seals on...

- When switching from a 2bbl to a 4bbl The slider rod that connects the the carburetor is 1 1/2"-2" too short. Someone posted an article that says you can make an extension or buy one. Does anyone know where to get one of these Or have a 4bbl slider version for sale My old car is getting...