Rotisserie

[four_gear]

Just curious about everyone's opinion on rotisseries. Who do you think makes the best one and why? Anything that you don't like about a specific one? Etc.

[ab7fh]

I built my own. Here's a link to the plans I used:

http://www.mts.net/~hpokrant/Restora...Rotisserie.htm

[Gryzynx]

Originally Posted by ab7fh

I built my own. Here's a link to the plans I used:

http://www.mts.net/~hpokrant/Restora...Rotisserie.htm

That link took me back!

Grew up in the same small town as the owner of that page. The purple '70 Cuda mentioned on his home page was quite the terror of the town and I'm pretty sure his Camaro was spanked pretty badly well before the 80 mph mentioned.

http://www.mts.net/~hpokrant/index.htm

[Rice Nuker]

That is a great rotisserie. Also thank you for the link!

[CARS]

I've had a Roto 2000 for the last 7 years. Love it.

http://www.theroto2000.com/compare.htm

[Rice Nuker]

Do you have a welder and access to some square tube metal?

https://store.uscartool.com/Auto-Bod...serie_c_9.html

shipping included build your own using this kit and some cuts of square tube that you get yourself.

375 out the door.

if you want I can post some pics of it completed in a couple weeks cause I just ordered it.

[vitamindart]

built one out of square tubing a buddie got for me and a couple pieces of threaded rods
(for balance adjustment) look at some on You Tube and you will see how easy it is to build it yourself. much easier to spin and lock it yourself if you have a way to balance the weight. i can spin mine to just about any spot and it will stay by itself...

[curtmaxwall]

What after making rotisseries? Means, in factory shop rotisseries are being passed from various solutions to make its body strengthen.

[ab7fh]

Originally Posted by curtmaxwall

What after making rotisseries? Means, in factory shop rotisseries are being passed from various solutions to make its body strengthen.

Try re-writing that in English...

[2darts]

Originally Posted by ab7fh

Try re-writing that in English...

too funny!!!

[demon34071]

Mopar Al on this site builds the best rotisseries..... But I am partial since he built me one and when he works on my car for me he mounts my car on his at his garage... So I have seen and used it a lot. PM him...

[Rice Nuker]

OR uhh, a couple months..
The US Car Tool kit is a little weird in my opinion. I decided to go alot heavier on most the specs. I would not recommend the kit so much, now that I have gotten into it.

My Rotisserie thread:

http://www.forabodiesonly.com/mopar/...d.php?t=196677

Originally Posted by Rice Nuker

Do you have a welder and access to some square tube metal?

https://store.uscartool.com/Auto-Bod...serie_c_9.html

shipping included build your own using this kit and some cuts of square tube that you get yourself.

375 out the door.

if you want I can post some pics of it completed in a couple weeks cause I just ordered it.

[drive48]

ours is home made we used acme threaded rod for balance adjusters.