511 C.I. Stroker moter (NEW)

[duster-dan]

511 c.i.
4.250" stroke/7.100" Rods
Platinum Series Pistons & Rods setup for PUMP GAS
9.5 compression Flat Top
1967 440 block, clearance all block work done. & checked
ARP bolts 244-1001
B/RB-H INT. Shaft MOPP3571071
B/RB 4.15 S/Tray MOPP5007345
440 Source Stroker 512 Kit
440>>512 stroker kit w/99538
RBU Ring/Bearings
CB743H H Rod Bearings
MS1795V V Main Bearings
990-04-29 4340 Taper Wall Pins
Childs & Alberet Piston Rings
RODS, Total weight 814 g.
ARP 140-5401 Mopar Main Stud Kit
MELLING HV 58-78 BB Oil Pump
MILODON 18335 Pick-up
MILODON 31010 HEMI DEEP SUMP PAN
MOPP4349816B/RB TIMING COVER
MRE 263 TIMING SET 3 BOLT.
Reciprocating weight 1010
Rotating weight 1242
Small end of rod 240
Large end of rod 1142
Bob weight 2256x4

P4349270 Cam & Tappet kit Mechanical-Mushroom Tappet
Lift .690" Duration 328 Overlap 114 center line 107
This is a Short Block all together.

Edelbrock RPM Aluminum heads EDL -60929
new out of Box never installed.
The Head is just setting on the block (for Pic) Heads never been torqed down.

www.440source.com/strokerkits

$3,700.00
Wyoming, Mi. 49509
have pics
danbracing@comcast.net

[SGBARRACUDA]

Is it me or are these pistons up side down?

[crackedback]

Originally Posted by SGBARRACUDA

Is it me or are these pistons up side down?

You would be correct.

[rumblefish360]

Serious, honest questions of the item being sold can be directed to the seller so he can explain and give details.

[duster-dan]

Originally Posted by SGBARRACUDA

Is it me or are these pistons up side down?

the short block is going back to the machine shop.

problem will be fixed.

dan

[SGBARRACUDA]

Originally Posted by rumblefish360

Serious, honest questions of the item being sold can be directed to the seller so he can explain and give details.

Did that!

[SpeedThrills]

My (deleted?) post was serious. I was trying to help him. Like I said, it sounds like a good price.

[crackedback]

Good to read you're going to get it squared away.

Who did the machine work? Any build/spec/clearance sheet info with the engine?

Sounds like a good price.

[SpeedThrills]

If I were in Mich., I'd check this out. Look at what it has, vs. the price. Just the heads and stroker kit cost that much... 511 cubic inches!

[69charger]

Will you sell those Edelbrocks separately from the rest of the engine?

[duster-dan]

Originally Posted by crackedback

Good to read you're going to get it squared away.

Who did the machine work? Any build/spec/clearance sheet info with the engine?

Sounds like a good price.

no, will have more specs after they turn the pistons around on the rods.

[duster-dan]

Originally Posted by 69charger

Will you sell those Edelbrocks separately from the rest of the engine?

really want to sell as a package deal.

[iran]

could you send it to iran?
i paying shipping price and 3700$ for engine

[SGBARRACUDA]

Originally Posted by iran

could you send it to iran?
i paying shipping price and 3700$ for engine

Is this for real?

[69charger]

I doubt that Iran deal is the real thing.
but, if you decide to part out duster-dan, I got dibs on the heads!

[GTXperience]

Originally Posted by SGBARRACUDA

Is this for real?

It is being watched closely. Also, I am sure Dan is not going to be sending the motor off along with the additional cash he receives from that international money order anytime soon.

[SGBARRACUDA]

Originally Posted by GTXperience

It is being watched closely. Also, I am sure Dan is not going to be sending the motor off along with the additional cash he receives from that international money order anytime soon.

You know I would like to think that ALL people are wise to those tactics, but?

[godfatherofchry]

i just biult this same motor last year for 6800 dollars.dam what a buy. and my work is bad!

[iran]

i want to know that how much a new 440 costs.?
my freand wants to buy that 511 to replace with his 360 on his cuda. you can send it to uae and he bring it to iran.
and im buyying a barracuda that i had not seen it , but i have pic from that .
because its in another city and im 16.5 years old so i cound not go there now.

how much do you think that it costs and how much i should have money to restore it

[daredevil]

theres a link in the cuda pic. spam