69 superbee vibration

[Sublime12]

I have a 69 superbee 4 speed with a vibration. I just replaced the u joints and had the driveshaft balanced. It seems to be under no load at low speeds, and more persistent at higher speeds. I have a little play in the slip yoke in the rear of the transmission, my thought is maybe the bushing in the tail shaft is worn, any suggestions?

[demon seed]

Also, if that Super Bee has the big assed front drum brakes check to make sure one of them hasn't thrown it's balancing weight. If it's gone it will have left a rusty square picture of the old weight.

[duster360]

I know your car is a 4 speed but my Dart has a 727 and the bushings went bad in it and I got it rebuilt and all the vibration went away.

[Sublime12]

I never thought of a weights on the brake drum. Thanks for the replys. I'll check them out tomorrow.

[Supershafts]

You'll have to be more specific and have lots more detail if you want to get a clear answer.
Otherwise you'll be doing all kinds of nonsense and getting nowhere, but helping your local economy

[cudascott]

more info would help but I will say my super bee 4 speed did the vibaration
under no load and i replaced the tail shaft bushing and it's good to go now