Hood-Pin Location??

[Woodie]

I picked up a set of Hood-Pins with the lanyards from Dales Cuda shop, I did a search on here and found a bunch of different information. Is there a factory location for the pins? Also any one have any idea where to find a lower "Chin" spoiler for a Duster/Scamp?

Thanks.

[davescuda]

the pins go in front of the hood stop. you can see the circle, then drill through the second layer of metal. somebody will show you a picture.

[Keith Mopar]

Here are some pics that should help. The circles area is where the factory location is. You will have to drill that out.

[Woodie]

Originally Posted by davescuda

the pins go in front of the hood stop. you can see the circle, then drill through the second layer of metal. somebody will show you a picture.

Thank you sir! BTW... Thank you for the great service!!

Thanks for pictures Keith.

[emnestor]

I have the AAr fiber glass hood and I am about to install my hood pins. Any tips for marking the location where the hood should be drilled?

[DA69RT GT]

Im planning on getting one from Spoilers by Randy...
They look good on his website and have spoken to a few people who liked em- keep waiting for a "sale" but he sticks firm on price.

http://www.spoilersbyrandy.com/Pages/default.aspx


maybe FABO could reach out and get a "members discount"????

[Woodie]

Originally Posted by DA69RT GT

Im planning on getting one from Spoilers by Randy...
they look good- keep waiting for a "sale" but he sticks firm on price.

http://www.spoilersbyrandy.com/Pages/default.aspx

Yea! thats Shiz!

[Keith Mopar]

Originally Posted by emnestor

I have the AAr fiber glass hood and I am about to install my hood pins. Any tips for marking the location where the hood should be drilled?

I mounted the pin in the car put a small bit of grease on the top and shut the hood slowly. The grease leaves a small mark of where to drill.

[Tony Fields]

Originally Posted by Keith Mopar

I mounted the pin in the car put a small bit of grease on the top and shut the hood slowly. The grease leaves a small mark of where to drill.

That's what I did also.

[805moparkid]

why drill another hole when there is a fender bolt a couple inches away??? just take the J clip off and make the hole round and your done...

[Woodie]

I'm going to giver after work, THANKS FOR INPUT!