[Found!] 1 bolt

[sammie]

I need 1 bolt that hold the two rear end housings together. its a 3/8 bolt and its LEFT HAND THREAD! I INCLUDED

A couple of PICTUREs to show where it goes and what it looks like.

 

[dale_brennon]

Do you have a fastenal store around you? They carry a huge variety of bolts.

 

[sammie]

Do you have a fastenal store around you? They carry a huge variety of bolts.

been down that road. only arp sells complete sets!

 

[rklein383]

Wouldn't a drive line shop have spares?

 

[brian6pac]

Master-Carr has them and they have a great on line catalog, every part, bolt has a CAD drawing to it. And they will sell one bolt. Fastenal SUCKS unless your a company that buys bulk 100 bolts at a time!

McMaster-Carr

 

[sammie]

Master-Carr has them and they have a great on line catalog, every part, bolt has a CAD drawing to it. And they will sell one bolt. Fastenal SUCKS unless your a company that buys bulk 100 bolts at a time!

McMaster-Carr

thanks ll take a look!

 

[belmateo]

thanks ll take a look!

whitepunkonnitro just listed some, you should check with him

 

[sammie]

whitepunkonnitro just listed some, you should check with him

no good. he doent have any! TTT

 

[mycuda]

Might have a few. Let me check later on after work.

D.

 

[sammie]

Might have a few. Let me check later on after work.

ok thanks

D.

 

[mycuda]

The conetype parts I got are right handed threads?

D.

 

[mycuda]

I believe ring gear is left thread.

 

[sammie]

The conetype parts I got are right handed threads?

D.

I guess the cone type where right handed> this is off a clutch type. so its left handed. Thanks for looking!

 

[Marcohotrod]

maybe install a helicoil thread insert, then use a right hand thread bolt

 

[iw378]

maybe install a helicoil thread insert, then use a right hand thread bolt

Would it not be better to just buy a set of the arp bolts ?

 

[Marcohotrod]

new bolts would be a little better

 

[sammie]

for everyone who mentioned buy the new bolts its easier! I was hoping I wouldn't have to go down that road, because ARP wants $70! $70 and I only need one bolt! That's why I asked around first!I found a local guy who gave me the bolt I needed. Thanks everyone