[SOLD] 1965 Plymouth Barracuda - 4BBL INTAKE MANIFOLD

[gwmax65]

Hello, am looking for a 1965 Plymouth Barracuda 4bbl intake manifold. I have a 2465330-1 Mopar 273 Motor in my '65 Barracuda, and haven't had the best luck finding a 4bbl intake manifold for it since in '64-'65 the intake bolt angle was different/'unique' and '66 and up had the same intake bolt angles.

I have a '64-'65 2BBL - 2463252 intake manifold already on the 273 and am looking for a 273 4BBL - 2465726 Intake Manifold. I did some research and found that Edelbrock made a manifold for those two years, but have forgotten the model number for that intake.

I would rather not put 318 heads on my 273 to solve this problem just to put a 4BBL intake on my 273.

I would barter my 2BBL intake manifold for a 4BBL manifold that will fit 100% on my '65 273 block. Otherwise, if you got it, or something that would work and want to sell it, shoot me a price! Thanks .

 

[66fs]

Edelbrock D4B intake also should fit. Or Offenhouser sometimes had a counterbore for the 66 and up heads. It had the correct surface for the 64 and 65 heads so you could use a hardened washer to cover the counterbore and use it on the 64 and 65 heads.

 

[65Val]

Hello, am looking for a 1965 Plymouth Barracuda 4bbl intake manifold. I have a 2465330-1 Mopar 273 Motor in my '65 Barracuda, and haven't had the best luck finding a 4bbl intake manifold for it since in '64-'65 the intake bolt angle was different/'unique' and '66 and up had the same intake bolt angles.

I have a '64-'65 2BBL - 2463252 intake manifold already on the 273 and am looking for a 273 4BBL - 2465726 Intake Manifold. I did some research and found that Edelbrock made a manifold for those two years, but have forgotten the model number for that intake.

I would rather not put 318 heads on my 273 to solve this problem just to put a 4BBL intake on my 273.

I would barter my 2BBL intake manifold for a 4BBL manifold that will fit 100% on my '65 273 block. Otherwise, if you got it, or something that would work and want to sell it, shoot me a price! Thanks .

If you can find '66-67 273 heads, then you can use the later cast-iron 4bbl intake or Eddy LD4B intake. Everythings the same on the later heads except they have the more conventional bolt angle/size.

 

[gwmax65]

Finally, scored a D4B for $150!! Too bad I'm doing a 360 Magnum fuel injected conversion for the Cuda, I'll find use for it in one of my Mopars eventually.