Heres the Beauty all my posts and questions and WTB adds are concerning 
I picked this car up about a month and a half ago, and when i got it home the poor thing was in considerably worse condition than advertised. NOTHING under the hood was properly bolted down, i think everything was hand tightened. None of the hoses are correct, the wiring is wrong and missing, everything about the car was a total afro engineering/cobble job. most of my time has been spent trying to UN-Phuck the prev owners "restoration" work. But im making gains now, i got the windshield and dash pulled, the dash is almost totally restored to like new, i found a proper bench seat and replaced the nasty 98 JEEP BUCKETS that were bolted to the floor using steel pipes. got a new steering wheel installed, and im just mainly trying to get a proper working floor shifter in it and get the car running. Shes leaking tranny fluid and coolant cuz the hoses are wrong, and shes leaking oil cuz the idjit only used 1 bolt instead of 2 on the electric fuel pump assembly. I had dual flowmasters exhaust added, and ive got a B&M Quicksilver shifter to install.
I picked this car up about a month and a half ago, and when i got it home the poor thing was in considerably worse condition than advertised. NOTHING under the hood was properly bolted down, i think everything was hand tightened. None of the hoses are correct, the wiring is wrong and missing, everything about the car was a total afro engineering/cobble job. most of my time has been spent trying to UN-Phuck the prev owners "restoration" work. But im making gains now, i got the windshield and dash pulled, the dash is almost totally restored to like new, i found a proper bench seat and replaced the nasty 98 JEEP BUCKETS that were bolted to the floor using steel pipes. got a new steering wheel installed, and im just mainly trying to get a proper working floor shifter in it and get the car running. Shes leaking tranny fluid and coolant cuz the hoses are wrong, and shes leaking oil cuz the idjit only used 1 bolt instead of 2 on the electric fuel pump assembly. I had dual flowmasters exhaust added, and ive got a B&M Quicksilver shifter to install.
