rebuilding a clutch type suregrip

-

Kernel Sanders

eating chicken wings and drinking beer
Joined
Nov 7, 2008
Messages
799
Reaction score
101
Location
Ottawa, Ontario, Canada
I tore down and started cleaning up to inspect a clutch type suregrip tonight.
everything looked good however the clutches are totally worn out to the point there is no way to tell which the cupped ones were... I have a new set from DrDiff and now don't know what the order they go in other than the thinner one in the center

I do have a picture I think answers my question but I want to be sure. Looks like the cupped ones are on the outside cupped outwards.

picture belongs to 747mopar on the forbbodies site

20150419_202018.jpg
 
Thank you Kimmer, yeah they were all flat and worn and one cracked.

I had this unit in a 489 case with 3.55 gears... There was no joy left when the gripping stopped gripping :)

here are pics of old clutches

1.jpg


2.jpg


3.jpg
 
-
Back
Top