Show That Lowered A-body!

-

lildemonkid

Well-Known Member
Joined
Apr 2, 2009
Messages
127
Reaction score
3
Location
huntersville NC
hey guys. unfortunately i dont have my A-Body lowered but i love seeing the results of everybodys work. so if you got em show em! here's mine to give a starting point.
 

Attachments

  • DSC00754.jpg
    181.2 KB · Views: 7,150
My old '69 Dart. It gave it's life for a '69 Dart 'vert resto. When this pic was taken it had 1"drop spindles and ajustable rear hangers, 1.04 torsion bars and worn out KYB's if I remember right. 15X7 Western Minilites and 215 series rubber. Looked like crap, ran like he!! and embarassed a few ricers both in a straight line and in the corners...with a stock worn out 360 4bbl from a truck. :)
 

Attachments

  • 353454357.jpg
    90.9 KB · Views: 7,027
looking fantastic guys! keep them coming! pauly i appreciate the start! ontos i really like the way that 69 sits. thats right around where i hope to have my 68 sit some day.
 
Here's mine,
Andrew
 

Attachments

  • WP_000105.jpg
    66.4 KB · Views: 7,025
  • WP_000107.jpg
    43.7 KB · Views: 6,672
2" blocks in the rear, lowered torsion bars 1.5" up front
 

Attachments

  • Cuda 017.jpg
    101.9 KB · Views: 6,809
Both have AirRide
 

Attachments

  • 70-dart.jpg
    62.7 KB · Views: 7,203
  • Page-6.jpg
    78.3 KB · Views: 7,366
Guys I am loving this! Keep them coming! I know there are a ton of lowered a-bodies. Im glad it got started too Jim. It should be awesome!
 
My old '69 Dart. It gave it's life for a '69 Dart 'vert resto. When this pic was taken it had 1"drop spindles and ajustable rear hangers, 1.04 torsion bars and worn out KYB's if I remember right. 15X7 Western Minilites and 215 series rubber. Looked like crap, ran like he!! and embarassed a few ricers both in a straight line and in the corners...with a stock worn out 360 4bbl from a truck. :)

I have always liked those wheels
 
Today after a jaunt through the sandhills...
 

Attachments

  • 012.jpg
    84.7 KB · Views: 6,684
here is mine.



DSCI0496.jpg


102_0132.jpg


newshoes025.jpg
 
2Darts, what brand rims are those on the primered beast? I really like them. I am putting 20's on the rear of my minitubbed dart with a narrowed rear end. I like how they have the cragar/bullit look, with just a little extra lip on the spokes.
 
68383GTS. These are LOWERED not "lowriders." Keep them coming guys! 72BBswinger I like the wheels. What size are they? And younggun2.0 that is one awesome looking dart!
 
2Darts, what brand rims are those on the primered beast? I really like them. I am putting 20's on the rear of my minitubbed dart with a narrowed rear end. I like how they have the cragar/bullit look, with just a little extra lip on the spokes.

they are Boss 338, 20" in the back and 18" in the front, unfortunatly i won't be able to use them, the front needs more backspacing. there to close to the lip.
 
68383GTS. These are LOWERED not "lowriders." Keep them coming guys! 72BBswinger I like the wheels. What size are they? And younggun2.0 that is one awesome looking dart!



thank you! its been a long time coming. hope to have it going this fall.
 
My 66 cuda 1 3/4 inch front/3 inch rear-[1 inch block-2 leaves removed].
 

Attachments

  • 102_2519.jpg
    116.4 KB · Views: 6,430
-
Back
Top